At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I need to know what inputs control the fuel injector on a 1993 tracker throttle body system. the wiring diagram shows the control wires for the injector going directly from the ecm to the injector.
Ecm does control but is also based on input from the Throttle position senser. unplug the TPS and try again. Also make sure the ECM and engine grounds are good
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I am not familiar with the model. Single point injection would normally inject almost continuously and if the wiring diagram was checked it would probably show the injector power comes direct from the same supply as the ECU uses and the ECU will provide the ground path if the ECU (ECM) is good and is receiving the correct data from the various sensors.
This provides possibilities: -
Bad ECU.
Bad wiring.
Insufficient information from sensors.
If there is an immobiliser it is worth checking it is properly disarmed.
the 1992 , has 2 engine choices.
one is MPI 16v G16B engine
and the other is the G16A 8V, TBI SYSTEM.
diagram, (fuel or electrical?)
its EFI so has both.
here is page that shows both on one, page
do tell engine and exact need and we do have it.
see bottom of this page, ?
Check the oil. A few of them cars back in the 80's had a low oil switch to prevent the engine from running if the oil was low by turning off the fuel pump. But if it runs when you pour gas in it, and you say it has fuel pressure? Why is it not getting fuel? There has to be shut off somewhere in the line that is preventing it. Try removing a battery terminal to kill the entire system then, retry it. You never know.
I need a starter wire diagram for a 1993 Geo Tracker
×