Removal: Remove the oil pan. Remove the pump-to-rear main bearing cap bolts. Lower the pump from the truck.
Installation: Pour clean oil into the pickup tube to prime the pump. Put the new pump in place (make sure hex-shaped driveshaft aligns with pump). Install & tighten bolts to 30lbs. Install oil pan & tighten bolts to 200 in. lbs.
This fuel pump is inside the fuel tank, the easiest way to get at it is to remove the bed.
Remove the fuel fil hose,and vent hose,and remove fuel tank straps,with jack supporting tank,lower enough to remove wire connector,and fuel lines .Remove tank from under vehicle,and remove the ring retainer,and pull the fuel pump assem,from tank.Follow instructions in the box with the new fuel pump.
234 views
Usually answered in minutes!
×