1996 Chevrolet K1500 Logo
Posted on Oct 05, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Emergency flashers do not work on 1996 C1500. Drivers side rear turn signal and brake light also do not work.

2 Answers

Todd May

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

New Friend:

An expert that has 1 follower.

  • Expert 68 Answers
  • Posted on Oct 05, 2009
Todd May
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

New Friend:

An expert that has 1 follower.

Joined: Oct 05, 2009
Answers
68
Questions
0
Helped
13632
Points
166

Very possibly bad wiring but may be flasher siloniod have you made sure the bulbs are good right test the wire and make sure it is getting power to the rear turn signal most of the time the are separte from hazzards but on this truck i think it is together

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 7 Answers
  • Posted on Dec 07, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Problem Solver:

An expert who has answered 5 questions.

Joined: Dec 07, 2009
Answers
7
Questions
0
Helped
2362
Points
10

That's a one piece set up in the steering column. The signals, hazards and the horns power run through it. If you have horn, you have power. The whole module may be bad. It's very easy to change. A repair book would make that change effortless.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where are the flashers located on 1990 GMC Sierra c1500 pickup w

You have one flasher for your turn signals and one for your emergency flashers. If one turn signal works then it isn't your flasher. I would look at the connector under the bed where the trailer plug splits off. This is a common place for corrosion. With a 12v test light you can probe from the light for power. If there isn't anything at the connector at the light move up to the splitter. If you have a signal there your problem is between it and the tail light.
0helpful
2answers

I have a 1996 Chevy Suburban And Turn signals don't work, brake lights don't work, high beam headlights work, low beam headlights doesnt work what could be the malfunction.

Check the fuses for continuity using the tone alert on your digital ohm meter; you don't have to pop the fuses out. Then I would check the turn signal relay.
0helpful
2answers

2000 jeep grand cherokee none of the rear lights work

Check BackUp Module, generally is located in the rear quarter panel (drivers side).
1helpful
3answers

1994 Chevy C1500 truck. No rear brake lights

Most likely this is a brake light switch issue. Replace switch.

If your emergency flashers don't work, all flasher bulbs are fine, but flashing too fast, then check and replace Hazard light switch.
0helpful
1answer

1995 GMC Jimmy brake lights not working

Brake lights run through the hazzard switch. There are known problems with this, and the multifunction switch. You may need to buy a new hazzard switch and OR the multifunction switch. Before you do that, check the pigtail that goes into the brake switch up by the fender, make sure it's not shorting out up there. Happened to me!
0helpful
1answer

My brake lites,rear turn signals or rear emergency flashers dont work on my 1996 2wd sonoma, but they work in the front,bulbs are not blown neither are the fuses on the side of the dash

you need a turn signal switch. i know it sounds wierd but thats what controls it all for the rear of the truck also very common in chevy products
0helpful
2answers
2helpful
1answer

Emergency Flashers totally out, Rear lights malfunctioning

Check the ground on the passenger side rear lights, it's likely bad. As for the hazards, sounds like a bad flasher or fuse.
0helpful
2answers

Rear brake lights stopped working

Check your fuses of course,you probably did.Listen your not going to believe this,the wire at the brake light switch can be bad.sometines the wire can break inside the vinyl cover just a milameter.use a test light for presence of voltage at the switch and check a few inches back to see it voltage is present. MAKE SURE YOU HAVE VOLTAGE AT THE SWITCH!
Not finding what you are looking for?

300 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...