I need a diagram of the serpentine for a ford focus 2002 z3

Hi

Thanks for using FixYa. You can look at this picture for serpentine belt for your 2002 Ford Focus Z3--



Ford Focus Z3 Serpentine belt Removal--

· Jack up the front of the vehicle and support it on jack stands. Use a wrench to remove two bolts and take off the drive belt lower cover.
· Note belt routing and make a sketch for your reference if you don't have a belt routing diagram from the manufacturer.
· Find the belt tensioner pulley. Use your wrench to rotate the tensioner pulley by pulling clockwise on a bolt in the center of the pulley. Slip the old belt off of the tensioner pulley.
· Release the belt tensioner. Slip the belt off of the pulleys and install the new belt according to your routing diagram.
· Rotate the tensioner again to allow the new belt to slip over the tensioner pulley. Release the tensioner again. Replace the drive belt lower cover and lower the vehicle.

Please do rate the solution and revert for further assistance.

Thanks
Rylee

You should be able to find a diagram on the core support or sometimes under the hood itself or in your Manuel