Questions & Answers for: tension pulley

...tension will occur. Pulley, Routing?Accessory Drive Belt 3.0L (2V)/3.0L (2V) FF Engine ItemPart NumberDescription 1 10300 Generator 2 6C348 Idler Pulley 3 3A674 Power Steering Pump 4 19703 A/C ...

Ad

Question about 2002 Escape

2 Answers

...pump pulley 46C301Drive belt 56B320Crankshaft pulley 68509Water pump pulley 76A228Drive belt tensioner 2.0L Zetec with A/C ItemPart NumberDescription 110344Generator pulley 219A216Belt idler ...

Ad

How do you replace the serpentine belt tensioner on 1990 sunbird 2.0 ohc Click on the following free direct Link. It has several of the Serpentine Belt Diagrams and Tensioners that are possible with ...

tension pulley for serpentine belt making noise The Tensioner Pulley Bearings are failing and either the Tensioner Pulley or the Tensioner Assembly (Pulley, Arm and Base) must be removed and replaced.

Question about 1997 Continental

1 Answer

...serpentine belt on a 97 lincoln 3.8L EngineInsert a 1/2 inch flex handle in the square hole in the tensioner. The tensioner has a square hole cast into the rear of the tensioner body directly behind ...

Question about 2004 Taurus

2 Answers

...pulley 33A733Power steering pump pulley 48620Drive belt 519D784A/C clutch pulley 66B209Drive belt tensioner pulley 76A312Crankshaft pulley 88A528Coolant pump pulley Component Locations 3.0L (4V) ...

Question about 2003 Explorer

1 Answer

...pulley mechanism. Always release the spring pressure gradually. Fig. Rotate the belt tensioner to relieve tension on the belt-4.6L engine shown, others similar To install: Route the belt over the ...

Question about 2002 Sedona

1 Answer

...Engine cover Accessory drive belts Idler pulley Crankshaft pulley Power steering pump pulley Belt tensioner pulley Upper and lower timing belt covers Support the engine with a floor jack and remove ...

the various pulley grooves on the pulley system. 6 Release the tension pulley bolt, and apply tension to the belt. The auto-tensioner will automatically apply the correct amount of tension on the belt

Question about 1997 Sable

1 Answer

...belt tension and install the belt onto the tensioner pulley. Make sure the V-grooves make proper contact with the pulleys. Make sure the spring keeper releases or improper belt tension will

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...