SOURCE: 2001 Santa Fe Key fob Programming
change the batteries then start the car and close it and press the key it should work
SOURCE: need to program key fob for santa fe 2011
you have to take it to the dealer and get it programmed with there computer. there is no other way to do so. sorry
SOURCE: how to program key fob for 2011 hyundai santa fe
Nonsense. I just programmed a new remote start fob on my 2011 Santa Fee limited and it worked just great. Follow the steps below and see what happens.
1. Open the drivers side door
2. Turn the Vehicle ignition to the ON position (Do not start the vehicle)
3. Locate the disarm/program button. (look closely, it is located on the wiring harness just inside the lower dash. it could be located just inside the fuse cover.)
4. Press and hold the disarm/programming button for 10 to 15 sewconds, the horm will beep 3 times. Release the disarm/programming button.
5. On the fob, press the Find/Panic button One time and the horn will beep one time.
6. Turn off vehicle ignition. (YOUR DONE)
172 views
Usually answered in minutes!
×