Cars & Trucks Logo

Related Topics:

Leslielovesollie White Posted on May 25, 2019
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Where is the fuel pump driver module located at on 02 mustang

1 Answer

Jeff Armer

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Cars & Trucks Master 3,418 Answers
  • Posted on May 26, 2019
Jeff Armer
Cars & Trucks Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Oct 21, 2018
Answers
3418
Questions
0
Helped
1150355
Points
14420

What engine ? 4.6 l 2 valve

Fuel Pump Driver Module, Coupe C451
Underside of luggage compartment
Fuel Pump Driver Module, Convertible C451
Underside of luggage compartment

5 Related Answers

Anonymous

  • 1010 Answers
  • Posted on Jun 24, 2008

SOURCE: 02 mustang fuel filter

their is a plastic cover on the drivers side under the car. you will have to take 4, 10mm bolts off and then you push the green clips and pull a same time and the filtler will come off

Ad

Anonymous

  • 1 Answer
  • Posted on Jun 18, 2009

SOURCE: fuel pump relay

I was just looking for another fuse and came across this diagram and it shows every fuse and relay and where it goes. The Fuel Pump Relay is in the O slot in the fuse box under the hood which is located near the battery. it is a 20 amp mini fuse. Hope this helps, i saved the link for future use if i need it, might be a good idea for you too. Good Luck here is the link.....
http://www.miracerros.com/mustang/2000_fuse.html

Anonymous

  • 630 Answers
  • Posted on Jun 05, 2010

SOURCE: I HAVE A 2001 FORD MUSTANG GT THAT WON'T START, I

Before you go any further open the trunk and check the fuel pump roll over valve switch, mounted on the left side inside the trunk, push the switch down and try the vehicle.

Anonymous

  • 1 Answer
  • Posted on Sep 12, 2010

SOURCE: 02 v6 mustang fuel pump relay location

looking for the fuel pump relay switch

Anonymous

  • 1188 Answers
  • Posted on Nov 20, 2010

SOURCE: were is the fuel pump

Hi!

The following link should be helpful to you:

http://www.fordf150.net/articles/idx.php/0/025/article/How-To-Fix-the-P1233-FPDM-NoStart-Condition-DTC.html

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

02 ford focus flooding so no start. I pull fuse an it will eventually start. But runs outta gas. Driver fuel module. Under seat?

Driver fuel module ???? Under the back seat ? The part your calling a driver fuel module is the fuel pump driver module ! What fuse do you pull ? If you would like help you need to go into more details . Your vehicle has electronic returnless fuel system (computer controlled ) Having the vehicle checked for DTC'S - diagnostic trouble codes could shed some light on to the problem . There is a fuel pressure sensor on the fuel injector fuel rail ,this is a input to the PCM engine computer .The PCM talks to the FPDM -fuel pump driver module to speed up or slow down the fuel pump .
P1233 Ford Fuel Pump Driver Module Diagnostics and Repair

2004 Ford 150 5 4L Stall No Start P0191 Fuel Rail Psi Sensor P1233 Fuel...

Ford Electronic Returnless Fuel System Diagnosis Part 1 Ford


0helpful
1answer

Is the fuel module the same as fuel relay switch? On 99 mustang

NO ! But your vehicle has both a fuel pump relay and a fuel pump driver module . The fuel pump relay is inside the CCRM - constant control relay module.
1helpful
2answers

Pump relay location

sounds like the immobilizer is locking out the fuel pump,
have you replaced the key without reprogramming it?if so take the old key and the new tape them together at the tops cut portions facing in opposite directions and try starting the car that way the security light should go out
1helpful
1answer

99 mustang where is fuel pump relay?

The fuel pump relay is inside the c.c.r.m (constant control relay module) located on a bracket behind the coolant overflow bottle...turn key on and off a couple times and see if you hear a clicking noise from relay. .if not "slightly"tap the box and see if fuel pressure retu
2helpful
1answer

2000 ford mustang 3.8 no power at fuel pump fuse is good relay is good it does have a anti theft device, inertia is good

You have a fuel pu,p driver module that gets the power from the inertia switch and the power for the fuel pump comes from that module. I would start by checking for a wiring problem. Below is a picture of where that module is located. At the plug of the module you want to make sure you have good continuity from the pink and black wire at the module to the inertia switch. Then you will want to make sure you have continuity from the fuel pump to the module in the brown and pink wire. That should be the power source to the fuel pump. One other thing to keep in mind and that is the PCM controls ground to the fuel pump so this may be an issue. Try that first to see if you have a wiring problem. If you have power from the inertia to the module but no power coming out of it to the fuel pump this may be your problem. Hope I was able to help...

2_29_2012_9_12_02_pm.jpg
1helpful
2answers

Where is the fuse for a 2001 ford 4.6litre mustang(fuel fuse)

The fuse for the fuel pump is located in the power distribution box/fuse box located in the engine compartment. It is in the number 14 position and should be a 20 amp fuse (see picture below of the fuse layout). Also, I don't know if you have checked this or not but there is a fuel pump cut off switch located in the trunk of the vehicle. I gave you a picture of its location in the second picture below. This should all be in your owners manual if you have one. If you do not and would like a copy, you can email me at [email protected] with your make, model and year and I will be happy to email you a copy. I hope this helps you and good luck.


clifford224_248.gifclifford224_249.gif
0helpful
1answer

2005 toyota corolla. no problems yesterday..this morning it was dead. I can jump it and it turns over but it won't stay running. doesn't seem to be getting any fuel. Which fuse could be causing this...

Fuel Pump-(test for current at the fuel pump using a multimeter or test light while cranking) Removal & Installation To Remove:
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Relieve fuel system pressure.
  3. Disconnect the battery ground cable.
  4. Remove the rear seat cushion.
  5. Remove the rear floor service cover mounting screws and remove the cover (except '02-'04). toy_car_cor-02-04fuelpump2.gif

  6. Remove the butyl tape and remove the floor service cover ('02-'04).
  7. Remove the fuel pump vapor pressure sensor electrical connector ('02-'04).
  8. Remove the fuel line U-clip and remove the fuel line from the fuel pump module.
  9. Squeeze the fuel vent line retainer and remove the vent line from the fuel pump module. toy_car_cor-02-04fuelpump1.gif

  10. Remove the 8 fuel pump module retainer ring mounting screws and remove the retainer ring ('02-'04).
  11. Remove the fuel pump module retainer using special tool 09808- 14020 or equivalent (except '02-'04).
  12. Remove the fuel pump module.
To Install:
  1. Install a new O-ring on the fuel tank.
  2. Install the fuel pump module into the fuel tank.
  3. Use the following procedure to install the fuel pump module retainer ring (except '02-'04). Fuel pump module installation toy_cor-05-18-1203.gif

    1. Align the notch in the fuel tank with the tab in the module.
    2. Matchmark a new retainer with the fuel tank.
    3. Using the special tool install and tighten the retainer ring 2 revolutions.
  4. Use the following procedure to install the fuel tank module retainer ring ('02-'04).
    1. Install the retainer ring on the fuel pump module.
    2. Fasten the retainer with the 8 mounting screws. Tighten 53 in lb (6 Nm).
  5. Install the vent line to the pipe until the fuel vent line connector clicks into place.
  6. Install the fuel line with the U-clip.
  7. Install the fuel pump vapor pressure sensor electrical connector ('02-'04).
  8. Install the floor service cover with butyl tape ('02-'04).
  9. Install and secure the rear floor service cover with the mounting screws (except '02-'04).
  10. Install the rear seat cushion.
  11. Connect the battery ground cable.
  12. Check for fuel leaks.
prev.gif next.gif
0helpful
2answers

Where is the fuel pump located on a 1995 Ford Mustang gt?

the electric fuel pump is located inside the gas tank, the gas tank must be removed to replace the pump module assembly which includes a new pump and sending unit if you buy itr from ford, u can buy the pump separetly from other sources



c2d3f66.jpg
0helpful
1answer

I HAVE A 2001 FORD MUSTANG GT THAT WON'T START, I ALREADY REPLACED THE FUEL PUMP AND FUEL PUMP DRIVER MODULE, IT HAVE SPARK AND CURRENT GOING TO THE FUEL PUMP BUT NOT GROUND OR PULSE TO THE INJECTORS

Before you go any further open the trunk and check the fuel pump roll over valve switch, mounted on the left side inside the trunk, push the switch down and try the vehicle.
11helpful
4answers
Not finding what you are looking for?

47 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...