SOURCE: How do I change the brake master cylinder on a
disconnect the front and rear brake lines, undo bolts holding the master cylinder to the brake booster. Bench bleed the new master and reconnect to booster and reconnect lines. Be very careful when undoing the lines from the master cyclinder as you do not want to damage them. Soak with WD-40 before loosening. Once everything is back in place you will need to bleed all calipers and/or wheel cylinders. Again soak the bleeder screws beforehand with WD-40 as they break off easily.
locate a an off road shop in your area. another idea is to contact the company that makes the kit you plan on using, they can give you an idea where to go and who is the best installer.
44 views
Usually answered in minutes!
×