Go to this site. https://www.youtube.com/results?search_query=changing+crank+sensor+on+97+mitsubishi+galant
If you need further help, reach me via phone at https://www.6ya.com/expert/gary_9c859f4aa7e5ab10
Follow the link for instructions, and yes 2003 is the same.
SOURCE: 1997 Dodge caravan crank position sensor
it is located on the bellhousing of the transmission it gets its signal from the flywheel.look where the transmission bolts to the engine.
SOURCE: 2002 mitsubishi galant
Has it overheated lately?
My wife overheated our Galant and it just stopped working, it cranks but that's it.
I pulled the sparkplugs and found them wrapped in a gewey jelly like substance. Like an oil/antifreeze combo.
I am going to replace the entire motor for $1000 as taking it to the mechanics to theorize and practice may cost more.
SOURCE: P0705 Transmission range sensor circuit
The sensor should be located where the shifter cable is attached to the trans. It will have a plug with several wires. Usually there will be a way to align it, like a hole with a pin when it should be in neutral.
SOURCE: Location of camshaft position sensor on 2004
On 1999 and later 2.4L SOHC engines it is located on the left end of the cylinder head (opposite end of the engine from the timing belt)
SOURCE: Change a crankshaft position sensor on a 2000 eclipse
Is this a V6 or 4cyl???>>>(V6) This requires removing the Harmonic balancer (crankshaft pulley). Remove (R) front wheel, remove engine splash Guard, Remove crank pulley, remove lower timing belt cover. The Crank sensor is located behind the crank shaft pulley!! I highly recommend having this done by a certified tech, requires special tools. Hopefully this helps!!
203 views
Usually answered in minutes!
×