- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The factory alarm is located under the driver seat its a black box try disconecting one of the wires u cant take all wires off cause it wont start but if you disconect one i think the smaller wire you will be able to turn the car on and alarm wont go off anymore but you will have to manually open your doors good lick
it is just a case of tracing every wire from alarm unit and disconnecting from vehicle wiring, and reconnecting the vehicle wiring where it has been cut , send me the make and model and i'll try to get the wiring diagram ,make it much easier
try disconect car battery for 5 min to get alarm to reset ,then disarm alarm via the remote before opening door or turning the key to start <if you have alarm remote
did it start before you changed the battery?when you say the alarm goes off do you mean the factory alarm or did you have it installed aftermarket? is there a theft or security light flashing inside?let me know maybe i can help
IF CAR DONT CRANK CAN BE THAT BATERY IS EMPTY, STARTER OR IGNITION SWITCH. IF ALARM SISTEM IS ORIGINAL TRY THIS: CLOSE ALL DORS AND HOOD, TRUNK AND LOCK AND UNLOCK PASENGER DOR WITH KEY. THIS RESET THE ALARM (IF BATERY IS DISCONECTED) MARKO
disconect the battery for about 15 minutes and turn the head lights on after bat is disconected and then turn head lights off reconect bat and this should reset your alarm system.
×