This has the entire step by step including the torque specs for a rebuild on several GM truck engines.
http://www.autozone.com/repairguides/Escalade-Suburban-Tahoe-Yukon-Denali-DenaliXL-YukonXL-1999-2005/Engine-Mechanical-Components/Rocker-Arms-Shafts/_/P-0996b43f80370b20
Good luck
SOURCE: needed torqur spec on rocker arms on 1994 gmc
There is no torque spec for rockers. You tighten until there is no backlash, then preload another 1/4 to 1/2 turn. With #1 at TDC on the compression stroke, you adjust #1 by this procedure. You can also adjust intake valves on #'s 2, 5 & 7 as well as exhaust on 3's 1, 3, 4 & 8. Then rotate the engine until #6 is TDC on compression stroke and adjust intakes on #'s 3. 4. 6 & 8 and exhaust on #'s 2, 5, 6 & 7. Good luck.
1,717 views
Usually answered in minutes!
×