2006 hundai tiburon... no hard shifting, clutch does not alwayus engage with out pumping. bled limes did not help. any ideas?

u still have air in it, re-bleed but this time stop on it hard then close bleeder.as far as ur throttle, it fly by wire meaning u have electronic throttle and non serviceable find one at the junk yard and replace

"Car won't go in reverse" - New Tiburon Forum : Hyundai Tiburon ...

www.newtiburon.com/forums/.../189049-car-won-t-go-reverse.html

Aug 8, 2010 - 23 posts - ‎16 authors
Okay guys I just sold my 03 tiburon GT 6 speed to a 16 year old. I just got a ... Join Date: Sep 2006. Location: ... "It stalls and just drift forward, no reverse lights" Now did he break somethng or is he putting it in 6th..... Any Ideas. ... To view links or images in signatures your post count must be 5 or greater. Location of reverse light switch? - New Tiburon Forum ...
8 posts
Jul 23, 2014
So who's reverse lights don't work? - New Tiburon ...
25 posts
Apr 11, 2009
More results from www.newtiburon.com
Missing: hatchback

2003 Hyundai Tiburon Manual Transmission Complaints

www.aboutautomobile.com/.../Hyundai/Tiburon/Manual+Transmission

My 2003 hyundai tiburon clutch and flywheel broke on 3 separate occasions since ...into reverse, I had a hard time finding it, it would not let me put it into reverse and I ....2006; Description of the Complaint: I have 2003 v6 tiburon, clutch failed at ... bought 2004 5 speed tiburon (she bought it before my problems started) and ...

Transmission Won't Shift/CEL Due to Failed Speed Sensors ...

repairpal.com > Problems > Hyundai > Sonata

Can you see the slave cylinder moving when the clutch depressed. If so, problem most likely internal to clutch. Possible broken shift fork... seized throw out bearing..... damaged pressure plate.... worn out clutch disc. The tranny will have to be removed for inspection

Hi Amiralred, I believe the problem is to be found with the clutch plate and most likely to do with a defective center boss. When it is removed I believe you will find that one or more of the torque absorption spring has broken and possibly the center boss. A good idea with clutch plates, is to use original replacement parts if possible. Regards John

Your engine or transmission mounts are worn. Have them looked at.

I an assuming that since it grinds that this is a standard shift transmission. If so, your slave or master cylinder for your clutch has either failed or leaked out, or both. Try adding some brake fluid to your Clutch master cylinder and pump vigorously to purge any bubbles. If you can engage your transmission after this, you will need to have the hydraulic clutch system bled. Until that time you will need to pump several times between gear changes to use the vehicle.

your clutch slave cylinder still has air in it and needs to be bled

The slave cylinder for your clutch has a valve in it, which keeps the clutch from engaging too quickly. The purpose is to keep you from just dumping the clutch and wreaking havoc on your transmission. If you're confident that you don't need that extra safety device in there, you can remove it, just google slave cylinder valve removal. It will give your clutch more of an aftermarket feel.

Could be a throw out bearing or the shift fork is broke.

check that clutch again