...Master/slave selection 2 ways to select master slave congiration 1. BIOS method. Start ur pc. nter the setup by pressing delete key or any other key as per ur bios.. now c if there is a option named ...
...master slave cylinder? The master is beside the brake master cylinder, between the brake cylinder and the fender. Follow the line down to the trans, it ends at the slave. Now that you know where they ...
...master slave cylinder I guess if you could decide which you are talking about, the master or the slave, it could be answered. masters do not have bleed screws, slaves do. slave cylinders at the back ...
Question about Caviar SE WD1600JS (WD1600JS20PK) 160 GB Hard Drive
...means Sec slave ?   single or master ::::: master with slave ::':: slave :::': note the plastic jumper is ' located at the rear of the hard drive next to the IDE/SATA lead/s hope this ...
Question about CRW-5232W 52X32X52 IDE CD-ReWriter (Retail) (CRW5332W) Burner
...master/ slave etc The options listed for 1st,2nd ,3rd Boot device include: IDE-0 means Pri master ? IDE-1 means Pri slave ? IDE-2 means Sec master ? IDE-3 means Sec slave ?   The BIOS is ...
Question about Deskstar 7K500 500 GB Hard Drive
slave or master switch on the hard drive want to hook up a external hard drive enclosure The BIOS is AMI. Under ADVANCED SETUP: The options listed for 1st,2nd ,3rd Boot device include: IDE-0 means Pri
Question about Deskstar 7K1000B HDT721050SLA360 500GB 7200rpm SATA300 SATA Hard Drive
master / slave on you computer During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up process to enter BIOS the scroll down
Question about Deskstar 7K1000B HDT721050SLA360 500GB 7200rpm SATA300 SATA Hard Drive
...master slave the biggest capacity hard drive will set as master During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up ...
...master slave Need switch from master to slave location During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up process to ...
Question about Motherboard Gt5408 Gt5438 Gm5407e Gm5442
...master to the slave cylinder. When clutch pedal is depressed, hydraulic fluid (brake fluid) is forced from the master to the slave. The slave cylinder should push out a little plunger that contacts ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions