Need to know about how to solve the engine check light that turn on.

The check engine light being on indicates a problem in the electronic system that controls the engine, so resetting the CE light without reading the code that was set with the light being turned on by the on board computer has not fixed the problem that is keeping it from starting. This is an early system called OBD1, it requires a special scanner to plug in and read the fault codes you have. .

If your "check engine" light stay turn on, will need scanned the PCM (computer) to know exactly what fault codes is stored there. Note this code number and send us again to send you details to solve it.

If you have service or check engine light turn on, will need to scanned the PCM (Powertrain Control, Module) to know exactly what fault code is stored there. With this code number we could send you additional details to solve it. Some Autozone or Autoshops with scanner reader codes make this job for free (sometimes).

Hope this helps and just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa.

Since your "check engine" is ON, have some fault codes stored in the PCM (Powertrain Control Module / computer); to know exactly about what codes are the, will need scanned the PCM wit OBD II scaner reader tool; some autozone or autoshop with this tool make this for free. The check engine light can come on for 1 of about 200 different reasons, most times it's something simple such as a evap leak or loose gas cap.

As a factory default any time the check engine light comes on the TRAC and VSC systems are disabled as a default.

Soft reset could be disconnected the battery few minutes (sometimes work), but if the codes turn on again, is confirm, have fault codes stored and need to know what is to solve it.

Try this ans send us news about this code numbers founded.

Since your check engine light is turn on, some fault code is stored in your PCM (computer), I suggest scanned the PCM to know exactly what fault code is there; with this code number we could send additional details and tips to solve it.

Keep us updated.

If your check engine light is turn on, some fault code is stored in the ECU and will need scanned this device to know what sensor is causing problems. Some Autozone or AutoShop with OBD scanner reader make this job for free (sometimes). With this code number could send additional details to solve and fixed.

Keep us updated.

When tha "check engine" light is turn on, some fault code is stored in the computer and just is warning about this; you will need to scanned the computer to know exactly what fault code is there.

Could be some vacuum problem, air intake sensors or other emission codes. With this code number could send you additional details.

Keep us updated.

CHECK ENGINE light turn on when any fault code or any maltfunction in there. I suggtes scanned the ECU or PCM to know exactly what fault code is stored, with this code number we could send additional details to solve it.

Keep in touch (remember to rate and comment this).

When the CHECK ENGINE light turn ON, one sensor in your vehicle is advise about an code fault. i suggest scanning for know what code is in there and solve it.

Good luck.

disconnect the battery for 5 minutes, but if u have not addressed the problem that turned it on then it will come back on in a few miles.