Check your throttle valve control cable is adjusted correctly
Could be input or output sensor or the trans control module or the solenoid pack in the trans or even worst case scenario, the ecm!
start in the order i listed!
do you have a check engine light?
SOURCE: '99 silverado 4x4,new trans,no gears.
I don't see you did anything wrong per your description.
With the engine off, check the level of the transmission oil, replace the dipstick, start the truck and recheck the fluid level, level should drop. This will indicate the front pump is working.
Next, with truck running, put transmission into any gear, then return to park position. Do you hear any ratcheting noise.
Let me know.
Regards,
SOURCE: 92 chevy s10 4x4 4.3L manual transmission no 3rd gear
Hi:
Your transmission has 3 shift rails...
1st - 2nd
3rd -4th
5th- Reverse
If your 3rd gear doesn't work , you have an internal transmission problem, such as a syncronizer, or similar fail... There is not much you can fix, without removeing the transmission.
SOURCE: What is the recommended oil type/weight for a 2003
5w30 if 4.7L 10W30 if 5.9L please specify what engine you have next time you need help. it helps us help you. Thanks
SOURCE: E40d trans will not shift into 3rd or 4th gear, only rev. 1+2
check or replace your thottle position sensor tps that trans needs to know where the throttle is to shift if it is bad it will do as you say wont shift to third
another telltale is it will act like it goes into lockup when shifting into reverse and stall the engine
SOURCE: 2002 jeep liberty auto trans
p0700 is pretty much the generic code for saying the computer that controls your transmission has a problem, it may not be the actual computer its self, but one of its sensores, or a bad wire, i would recomend taking it to a reputable transmission shop
139 views
Usually answered in minutes!
×