1990 Chevrolet C1500 Logo

Related Topics:

A
Anonymous Posted on Jan 04, 2014

How to repair tail lights

Brake lights and reverse lights work

5 Related Answers

Anonymous

  • 3 Answers
  • Posted on Jan 06, 2009

SOURCE: No tail lights

Try checking the headlight switch it may have broken contacts in it. Easy fix go to a salvage yard find same make and model truck, swap headlight switches.

Ad
emissionwiz

Marvin

  • 85242 Answers
  • Posted on Mar 26, 2009

SOURCE: 2001 Chevy Lumina brake lights not working

test and replace the brake light switch, it is located at the top of the arm the brake pedal is attached to.

Anonymous

  • 1111 Answers
  • Posted on Jan 06, 2010

SOURCE: All lights work except tail lights and dashboard,

most likely a fuse and check the bulbs to the rear running lights if after this don't clear the issue one of the 2 filaments have most likely blown

Anonymous

  • 12 Answers
  • Posted on Mar 15, 2011

SOURCE: my reverse lights and brake

It sounds like you have two separate switch problems, brake light switch located at the top of the brake pedal arm, loose or broke, and the back-up light switch located on transmission or linkage depending on transmission type. When asking questions always give as much info as possible.

Anonymous

  • 18 Answers
  • Posted on Sep 05, 2011

SOURCE: i have no tail lights, reverse lights or turn

Sounds like your turn signal switch is bad

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to repair not working rear lights 1997 gmc jimmy

brake lights not working - 1997 GMC Jimmy - RepairPal

repairpal.com > Questions > GMC > Jimmy > 1997 GMC Jimmy
Jan 11, 2011 - hi about 2 days ago i realized my brake lights were not working but my turn signal lights were working and parking lights as well but no brake ...

Tail Lights don't work but third brake light does, not fuses ...

answers.edmunds.com > Edmunds Answers
Sep 23, 2009 - 97 GMC Jimmy 4x4 blinkers work, reverse lights work, above window ... I just lost hazard lights and rear brake lights, they were working 2 days ... If it is a frayed wire or solder point, then you can repair it, but not any worn contacts. ... Does anyone have any suggestions on 1997 Honda Accord tail & brake lig.
0helpful
1answer

My brake lights work but my tail lights and reverse lights don't work. Also my dash lights quit when I changed the switch for my headlights.

Check your fuses. I had the same problem with a 90 Honda civic. Dash lights went out, tail lights also went out. Replaced 1 fuse and all came back on.
0helpful
1answer
1helpful
1answer

How do I change a brake light bulb in a 1999 c70 volvo?

Welcome to FixYa.com
Brake Lamp Replacement

Location of the lights

Image

The illustration shows the locations of the lights on the RH side. The LH side is the same but

mirror-reversed.

The lights have the following functions:

- 1 +1 = Parking light Fail light

- 2 = Reversing light

- 3 = Fog light LH side only (LHD cars)

- 5 = Direction indicator

- 6 = Brake light

Image

Tail light changing bulbs

Ignition off.

Open the cover in front of the tail light

Undo the wing nut and take out the lamp holder.

Change the defective bulb.

Fit in reverse order.

Check that all bulbs lamps are intact and in working order.

Image

Replacement of tail light cluster

Note! If a new tail light is to be fitted, the sleeves must be ground down 1.5 mm.

Open the cover in front of the tail light Undo the panel partly in front of the tail light Unplug the

connector for the tail light Undo the four nuts securing the tail light see illustration.

Pull the tail light straight out. Fit in reverse order

Note! check the sealing and fit on reassembly.

Check that all bulbs lamps are intact and in working order.Thank you for Using FixYa.comKind Regards, LeeYour FixYa Expert and Master Technician
8helpful
1answer

2004 tail light wire diagram/colors, need both bra...

I can't get my brake lights to work. the rear one in the window works but the tail ones won't work.do you have any ideas as of what to try to fix this problem. Thanks!
JO
5helpful
2answers

2002 Toyota highlander passenger brake light not working

RE: 2002 Toyota Highlander 2.4cyl. 4X4 Base Model

I am a Certified Technician and have basic knowledge with electronics in electrical wiring. I searched the web and discovered this is a common problem.

I fixed the problem and it was a simple procedure... The problem is with the reverse light socket at the side with no brake light. This socket functions as a hub to direct current to the brake bulbs.

Remove reverse light socket and re-seat bulb. Check for loose or broken prongs. Replace if necessary.

Swap the reverse socket with the other side.
0helpful
2answers
0helpful
1answer

Left Tail Light not coming on

Sounds like one of two possibilites, the light itself may be a double filiament meaning there is one bulb which does both tail light and brake. One of the filiaments in the bulb could be burned out, try changing the bulb. If not that, then the realy might be damaged which gives power to the tail light. It's a bit of a bigger problem to diagnose.
Not finding what you are looking for?

75 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...