Serpentine belt diagram serpentine belt diagram gates

Diagrams are available from Gates, Dayco, and Continental (Contitech) for most serpentine belts. Replacing the belts shouldn't be undertaken unless you have the proper fitment tools and are familiar with alignment procedures. Serpentine belts are typically replaced every 60K miles and Gates Racing Blue are the finest on today's market, lasting bit longer under demanding driving conditions. Replace any accessory belts, the crankshaft front oil seal and water pump at the same time... you will thank me later!

You should be able to get that by going to the website for Gates rubber and belts.

Here's a link to the serptentine diagram for our '94 Olds 88 Royale...

http://www.gates.com/common/part_locator/view_diagram.cfm?id=S6005

Here are two links to take you to the serpentine belt diagrams... choose your engine type.

V6-24 valve engine
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S5021
V6--12 valve engine
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7021

Here are links... choose the engine size you have...

4cyl 2.2L http://www.gates.com/common/part_locator/view_diagram.cfm?id=S4003

V6 3.4L
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S8015

You didn't mention engine size.
Here are links to the belt routing diagrams you will need to put the new belt on...
V6 3.2L http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7046
V8 4.2L http://www.gates.com/common/part_locator/view_diagram.cfm?id=S6042

Here is a link to a video which will walk you through the replacement step by step...
http://www.wonderhowto.com/how-to/video/how-to-inspect-and-replace-your-car-s-serpentine-belt-267229/

I can't find that Ford had a 3.6L in 2000 for Mustang.
Here's a link to a 3.8L
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7002

Here's a 4.6L diagram
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S8016

I assume you are asking how to change a serpentine belt. This link will take you to a good "how to" video which will guide you thru the process step by step...
http://www.wonderhowto.com/how-to/video/how-to-change-a-serpentine-belt-on-your-car-39904/

Also, here are two links to the serpentine belt diagram to help you with routing the belt on reinstallation...
If you have a V-6 http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7033

If you have a V-8
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S6005

You have a serpentine belt. Depending on your engine size, choose the following diagram to help put the belt back on.
V-6 2.3L http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7007
V6- 3.0L http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7012
V-6 4.0L http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7008

Follow this link for a video on how to replace a serpentine belt...
http://www.wonderhowto.com/how-to/video/how-to-inspect-and-replace-your-car-s-serpentine-belt-267229/

Here are links to the diagram...

If your engine is the 2.3L 4 cyl... http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7042

If your engine is the 3.0L V6... http://www.gates.com/common/part_locator/view_diagram.cfm?id=S6036