P1580 code repair

Take it someplace like AutoZone. They'll do it free.

P1580 is throttle actuator B1 malfunction P0342 Is camshaft position sensor circuit low input

code p1580 refers tothrottle motor, bank, 1--TPM/ISC--circuit malfunction===causes --wiring--connections--throttle motor---ECM I suggest that you have the throttle motor checked out and replaced if necessary

Use Google
Type in ---OBD Code P1580 2009 mitsu galant

go to auto zone or any auto parts stores buy haynes or chilton repair manual. go on line look for autodata on line repair manuals.

Your code relates to throttle motor bank 1 circuit mallfunction, this can be caused either by a wiring fault, the throttle motor itself, or ECM the most common fault is the air flow meter also called air mass meter

Hi, try cleaning out the throttle body.

code p341...cyllender 1 misfire
code p1580..throttle actuator b1 malfunction
code p740.. manufacturer specific trouble code
code p0501.. vehicle speed sensor

Hello
I think you mean flight recorder??
That is just for info only and does not need any repairs.
We usually delete it after checking it.
This is only for professionals to read the data for a problem and will stay there in the code section till deleted.
I think it DTC P1580

P0100 OBD-II Trouble Code

Technical Description

Mass Air Flow (MAF) Circuit Malfunction

Basically this means that there's a problem with the Mass Air Flow (MAF) sensor or circuit.

You will likely not notice any serious driving problems, but there may be symptoms like a general decrease in power or sluggishness.
Causes

A code P0100 may mean one or more of the following:

* The MAF may be disconnected, or a wiring connection may be bad.
* The MAF sensor may be faulty.

Possible Solutions

Use an OBD II Reader (or go tou your local parts store and they will for free) and reset the code and see if it comes back.
Then start with the cheapest, easiest repair procedures:

* Check the Mass Air Flow Sensor wiring/harness is connected properly and that there are no broken / frayed wires.
* Unplug and reconnect the MAF wiring harness a few times to clear the contacts.
* Check the voltage of the MAF sensor (refer to a repair manual for vehicle specific information).
* Replace the MAF sensor.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.