try www.autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Desktopsbyduck-Computers

1061 Answers
Posted on Jun 02, 2009

SOURCE: blew the serpentine belt and don't have a diagram... are they difficult to put on a Mazda?

YOUR LOCAL MAZDA DEALER WILL GIVE YOU ONE OR DOWNLOAD ONE FROM MAZDA.RICHARDM69

Patrick Rayome

1757 Answers
Posted on Mar 06, 2010

SOURCE: I need a serpentine belt diagram for a 2003 mazda

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/2003/make/mazda/model/tribute/2003_mazda_tribute_drive_belt_routing_diagram.htm

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3

Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.

3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.

4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.

5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.

6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

Read full answer

Sep 21, 2011 • 2003 Chevrolet Impala

0helpful

1answer

PLZ I NEED FOR A 04 MAZDA MAZDA 6 V6 THE SERPENTINE BELT DIAGRAM THANK YOU SOO MUCH FOR UR HELP !!!

Hello ezzywaylogis,

Below is a diagram of the belt routing.

I hope this helps.

Regards,

Jerry

Read full answer

Aug 28, 2011 • 2004 Mazda 6

0helpful

1answer

I need the serpantine belt routing diagrams for a 1993 Mazda 626 v-6

Question Posted by Asker under the 1994 Mazda for a 1993 Mazda.

Click on the following: free, direct Link. It has several Diagrams including the Serpentine Belt Diagram for your 1993 Mazda 626 2.5L DOHC V6. It has the 2.0L DOHC 4-Cyl Diagrams as well as Instructional and Directional Diagrams that will help you.

http://www.2carpros.com/car_repair_information/year/1993/make/mazda/model/626/1993_mazda_626_drive_belt_routing_diagram.htm

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

Read full answer

Apr 03, 2010 • 1994 Mazda 626

2helpful

1answer

Serpentine belt diagram mazda6 wagon 3.0Litre 2004

CLICK on the following LINK. It has the Sepentine Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2004/make/mazda/model/6/2004_mazda_6_drive_belt_routing_diagram.htm

Read full answer

Feb 28, 2010 • 2004 Mazda 6

1helpful

1answer