2007 Hyundai Accent GS Hatchback Logo

Related Topics:

zachary herber Posted on May 13, 2012

Transmission wont shift into reverse feels like something is blocking the gear

All other gears work fine just cant reverse cant even get it into gear like there is a wall there.

5 Related Answers

Denis Aube

  • 142 Answers
  • Posted on Aug 19, 2008

SOURCE: transmission/shifting 2001 Sante Fe - Hyundai

Sounds like you might have serious internal transmission problems.

As soon as you can, get someone with a code reader to plug in the vehicle and find out what the code is for the Check Engine light to come on. Might give you a better picture of what`s going on.

It could also (cross your fingers) be something more usual like a clogged transmission filter (located inside the pan), or shift solenoid.

By the way, have you checked the level, look & smell of your transmission fluid?

Level should be checked with the vehicle running, after passing it in all gear ranges on the shifter, and putting it back in park (Check it on "cold" or "hot" level depending on if it`s been driving for a while or not).

As for look and smell, it should be reddish and not smell burnt. Hard to describe the smell of burnt transmission fluid, but normal fluid does not smell too strongly, kind of sweet. Burnt oil is usually black and has a strong odor. If the oil is burnt you have internal damage to the transmission.

One piece of advice I give you is get it fixed as soon as possible because if you don`t already have serious internal transmission problems, the longer you wait, the more chances you have of getting some, to the point of the vehicle just refusing to move. And believe me, speaking from experience, the transition point from the symptoms you describe to total refusal to move and the need for a tow/transmission rebuild is not that long usually.

Ad

Anonymous

  • 1 Answer
  • Posted on Nov 16, 2008

SOURCE: automatic transmission sounds like it stuck in 3rd gear

You need to check the transmission fluid level, if it is low the tranny will not shift. If, however, the fluid is to the proper level then you will need a new transmission.
Try putting new fluid in and look for a leak in the pan gasket, then all you may need is a transmission service. When the service is done the mechanic will look for pieces of metal in the old fluid, if found this is very bad and you will need a new tranny.
You might consider a new or used car, you can definately find a good deal out there!

Anonymous

  • 1 Answer
  • Posted on Dec 15, 2008

SOURCE: Broken Linkage on a Manual Transmission?

what kind of vehicle is it?

Anonymous

  • 202 Answers
  • Posted on Feb 10, 2009

SOURCE: 2001 Hyundai XG300 won't shift past 3rd gear

sorry to say trans is fried.
Consider a used trans from the bone yard
or a rebuilt one.
An independent auto shop is likely to give you a fair price!!!!!!!!!!!!!!!!!!!

ghost45

PAUL MC G

  • 1280 Answers
  • Posted on Oct 03, 2009

SOURCE: vehicle wont change up into gear reverse gear not

P0734 - 4th gear incorrect ratio. P1529 Malfunction Indicator Lamp Request. Problem is in the transmission.
Take/Tow your vehicle to an authorized Hyundai dealership and pay the diagnostic fee... they will tell you exactly what the problem is and the cost of parts/labor to fix it... at least this way you'll know what the problem is and what's required to fix it.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

2004 ford explorer truck will start will go through all gears but wont move. Cant even feel the transmission sliding into gear. There is no little jerk when you pull it out of park. Any ideas?

If you don't feel the clicks going threw the gears, the shift cable could be broken. Could be the detent in the transmission. This would go in gear though. Next would be the transmission died.
0helpful
2answers

My Isuzu kb250 diesel engine model 2008 it doesn't want to take gears when running

YOU probably have a problem with the clutch not fully releasing when you are driving.


Clutch Drag Kills Synchros
0helpful
2answers

Want shift into. Hi gean

i take it is a automatic check gearbox transmission fluid or the torque converter may be at fault
1helpful
1answer

Remove center console on a 2003 montero xls

check shift cable and linkage. may have a broken bushing
0helpful
1answer

My jimmy won't shift into high gear or reverse, it just revs up. Other gears still work. This came on supers suddenly, drove it somewhere and it was fine, then when drove about 10 miles towards home, it...

Does it also hold first gear longer that it should and then shift right from 1st to 3rd? It sounds like you broke the sun shell in the transmission. The trans will need to replaced or rebuilt.
3helpful
1answer

Transmission: Reverse

check power going to reverse shift solynoid and check neutral switch
0helpful
2answers

All the sudden my 1999 dodge durango wont shift into reverse?

YES SOUNDS LIKE IT IS THE SOLENOID NOT SHIFTING INTO REVERSE OR TRANSMISSION CONTROL MODULE NOT SENDING SIGNAL TO VALVE BODY SOLENOID
0helpful
1answer

Cannot engage transmission from first to second gear

Hi,
maybe has a broken linkage or the bolt came lose.
Check if you can engage hall the gears pushing the linkage by hand,engine ranning and same one pressing the clutch!that way you can have same idea wath is wrong?!
Not finding what you are looking for?

75 views

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...