Radio wont come on and the fuses appear to be good

I agree with Jerry - sound like perhaps your ECM fuse is blown which would prevent your car brains from working. Take off the cover, invest in a tiny fuse puller - you can see the break in the "U" shaped metal or black splat if the fuse cut-loose. Also, make sure you don't have anything plugged-into your cigarette/power outlet(s) and after checking/replacing fuses, retry restarting your car. Also, what red light is on - the two zig-zag lighting bolts, or all/some of your lights?

Check for blown fuses. GOOD LUCK FRIEND.

It wont go into gear because you have no power to your brake light switch or your brake light switch is bad. test your fuses with a test light or volt meter if all are good replace brake light switch.Its probably a blown fuse if this was helpful please leave good feed back

did you check for a blown fuse in fuse box? if good check fuse in the back of radio itself and replace.

Check your fuses.There are 2 fuses for the radio.One for the radio power and lighting and one for the clock for the radio.You did not state what model Buick you have so I can`t tell you what fuse box to look at for the fuses.Always state year ,make,engine,and model of vehicle if you want to get your questions quicker.It makes it easier for us to look up.Other it could be a guessing game and you would not get a good answer.Also you should always rate the answers.That`s your way of saying thank you to us.Hope this helps.Let me know the info and I`ll be glad to help you out more if needed.Good luck.

You need to take it to the dealer. One of the system computers is failing. I do not know that model but it could be either the body computer or dash computer. Good Luck.

Are you sure no fuse was blown? there are more than 1 fuse box (in engine and under dashboard).

the new radio is definately the problem because of the old radio used to dim . you need to by pass the old dimming of the radio

have you checked the fuses make sure they are not burned.its usually the red but check all of them.

First check to see if the radio is coming on. Does the light work and can you change stations. If it appears that the radio is working visually, either your speaker plug in at the back of the radio for the speakers is loose, or you have an internal problem in the output section of the radio. However, first I would check my fuse panel & make sure that the fuse that powers the radio is good. Rick