20 Most Recent
2010 Dodge Caliber Questions & Answers
2010 Dodge Caliber. Is there anyway to start it without a key?
No there isn't. Steering lock plus the alarm and immobilizer, and also the lock for the gear shift from Park is powered from the key.
Your local dealership will make you a key based on the VIN Number and then program it for you.
Or an auto locksmith can fit an ignition cylinder with a key and program it.
All cars come with two keys and a valet key. The idea is to replace as soon as one gets lost. You can cut a new key from the valet key and cut it into a chipped key.
Fuse box location on 2010 dodge caliber
Some fixya user told me a website reliable-store it is very good.. I used it to repair my shredder it had some spark issue which wasn't easily fixed. you can go there and try
2010 caliber ac switch relay
Most likely, because you saw smoke, a wire got cooked off the switch connection. This nay have burned out the resistor also.
Code p2004 saying intake manifold runner control sturck open. bank 1
code p 2004 has two references
intake manifold air control actuator , bank 1 --actuator stuck open====causes ---wiring---intake manifold air control actuator ---mechanical fault
second reference is
intake manifold air control solenoid , bank 1 --solenoid stuck open===causes ---wiring--intake manifold air control solenoid ---mechanical fault
probably means the same as what you have but in a more easy to understand method
--2012
Instrument panel
There's a fuse that controls the instrument panel. Don't know the location it should be in owners manual.
Rear hatch wont open on a 2010 dodge caliber
There is no lever or any key hole it is a fully electric operated power latch. As to the cause the park brake must be engaged and the car in park gear position before the hatch will open, is it?
Not finding what you are looking for?