SOURCE: Crankshaft position sensor location - 1991 Dodge Dakota 5.2L
it is on the passenger side on the back off the motor.there are two allen head bolts or 13mm.it goes into the transmission and normally has rubber at the opening.you should be able to gets this from the top follow middle of valve cover on pass. side the go strait back toward the fire wall.please rate this answer.
SOURCE: i need to know if i can only put a 1991 dodge
YOU COULD USE THE SAME TRANS FROM LIKE 1987 TO 1994 AT LEAST!!
SOURCE: What is the gear ratio
The standard gear ratio for a '91 Dakota with the 318 V-8 was the 3.55 ring and pinon. The 3.90 or the 3.21, or the 2.76 could be ordered as an option. However the most of the Dakotas, either the V-6 or the V-8 were ordered with the 3.55 non-locking rear axles. Also your truck may have had either the 7.25" rear end, having a differential cover that is shaped ( 8 sides) like a "stop sign". Most likely will have the 8.25" rear end, having a "more rounded" differential cover. With your truck being a 318 V-8 the 8.25" rear end was more common. Hope that helps.
Don Fitzpatrick. Washington, Ok.
Oklahoma Trailchasers 4X4 Club.
59 views
Usually answered in minutes!
×