Airbag warning light problem

you can reset the code with a code reader, or the FIXD App Module. I have one

FIXD - The Car Scanner That's Saving People $1000s

https://www.fixd.com YES! The free FIXD app is compatible with both iPhones and Android smartphones. It only takes a few minutes to set up and start monitoring your car's health ...
‎FIXD Sensor Sale! 67% Off! · ‎Vehicle Compatibility Test · ‎Returns Warranty · ‎Privacy
You've visited this page many times. Last visit: 20/09/21

Airbag Light Codes for Fords - It Still Runs

https://itstillruns.com > airbag-light-codes-fords-7652177
When there is a problem with a Ford's airbag, the airbag warning light will illuminate and flash a code that identifies the problem. Because airbag problems ...

53 Airbag Code - 53 SRS Light For Ford Falcon

https://airbagcode.com > ford-falcon > 53
53 airbag error code for Ford Falcon and possible reason of 53 srs is Air Bag Tone Warning Indicator Circuit Failure.
Missing: 1996 ‎' Must include: 1996

• 
  

  53 Airbag Code - 53 SRS Light For Ford F - AirbagCode.com

  https://airbagcode.com > ford-f > 53
  53 airbag error code for Ford F and possible reason of 53 srs is Air Bag Tone Warning Indicator Circuit Failure.

Why would the dealer unhook the air bag light ? Turn the key to the on position ,is the air bag light lit ? That would be ******* for the deal to disable air bag light . An besides ,there is no buzzer for a non working airbag light. So take it back to the dealer.

Air Bag Warning Indicator The instrument cluster is hardwired to the restraint control module (RCM). If an air bag system concern is detected, a diagnostic trouble code (DTC) is logged, and the RCM provides a ground path to the instrument cluster, turning on the air bag indicator

If there is a problem with the airbag system a DTC- diagnostic trouble code would set

Restraints Control Module Diagnostic Trouble Code (DTC) Index DTC Description Action B1869 Lamp Air Bag Warning Indicator Circuit Open Go To Pinpoint Test N . B1870 Lamp Air Bag Warning Indicator Circuit Short to Battery Go To Pinpoint Test N . All other DTCs - REFER to Section 419-10 .

Depending on type of SRST, the air bag module may have detected something that in case of accident, it may prevent the airbags to deploy.
Have the car scanned for error codes. If the the warning light is ON, there sure is an error code.
Remember that some manufacturers (according to local laws), program the ECM SRST system to issue a warning at certain mileage or time, just to remind you that it is time to replace the air bag assemblies at the steering wheel and dashboard...

(Ouch... this may be expensive!)

for the air bag lights u may just need to clean the connections for the airbags under your front seats worked for me.

Some cars are designed to illuminate the warning light after the battery is disconnected. Playing around with the airbags and trying to turn this light off can be dangerous. That is why most people recommend taking it to the dealership to have it turned off. It might cost a few bucks but would be cheaper than having to replace the air bag if you accidentaly set it off while trying to turn the light off. I know that most people would like to try and fix it themselves, but just consider what might happen if you accidental perform a wrong step. Hope this helps

Most vehicles air bag systems are not user serviceable.
You will need to go to your dealer.

u have to replace all dammage components for the air bag system first including the air bag module
if u install the air bag it would not blow out like that
the system is in default that why the warning light is on
u would have to get the vehicle scan to see the reason why the light is on or to reset it ( by dealer )

When your airbag warning light apears it means your air bags wont actually work in an accident best to take to your local dealer or mechanic with the apropriate computer to scann your vehicle it may be as simple as low voltage

OBDII scanners for the home DIY guy only scan powertrain codes ... and not body codes .... which is where the airbag code(s) would go. Scanners that do both are expensive. I would call a local auto parts place that advertises that they will scan for free ... but ask them if their scanner can read body codes related to the air bag. If they say yes ... I would take it to them and to narrow down your troubleshooting ... since the airbag light can go on for a bunch of reasons and you do not want to just throw parts at it.
Helpful?
Good luck with your troubleshooting!

is this van new for you ? is it a status light letting you know that the airbag is loaded and ready for anypassenger that you have in your van ? do you have a key that you can turn it off in most vans there is an option to turn air bag on or off depending on size or opinion of passenger . im thinking that if its a status light its okay to be on letting you know its ready for opperation . take a look at your owners manual airbag section . and if it does turn out to be a warning malfunction indicator please dont waste time take it to your local dealer and have it checked out .hope this information helps good luck