Hi guys, my 2009 Dodge Grand Caravan get a code C2204 ( Dynamic Internal Sensor) and I want to change the sensor, Can any one tell where is it located? Any help is appriciated. Thank u

Coolant Temperature Switch (Sensor) Replacement Service

YourMechanic https://www.yourmechanic.com > ... > Grand Caravan
On average, the cost for a Dodge Grand Caravan Coolant Temperature Switch (Sensor) Replacement is $112 with $17 for parts and $95 for labor.

2009 Dodge Grand Caravan Coolant Temperature Sensor

AutoZone https://www.autozone.com > engine-management > 20...
Results 1 - 6 of 6 - PRICE: 35.99 · Location:: Coolant Temperature Sensor · Wiring Harness Included: N · Connector Gender: Female · Terminal Type: Blade · Terminal ...

2009 Dodge Grand Caravan Coolant Temperature Sensor

Advance Auto Parts https://shop.advanceautoparts.com > ... > Sensors
We currently carry 3 Coolant Temperature Sensor products to choose from for your 2009 Dodge Grand Caravan, and our inventory prices range from as little as ...

Sorry, no easy fix. Sounds like he missed a ground somewhere. Take it back!

Code 135 should be a problem with the heater circuit for O2 sensor bank one sensor one. The O2 sensors have a heater to make them work as soon as the engine is started. The problem could be the sensor or the heater circuit.

Hi there:


DTC C2204 - Dynamics Sensor Internal

This light is on most likely due to a speed sensor failure. Either the rear one in the rear diff housing or the right or left front speed sensor. You will need someone with a full level scan tool to scan the ABS module to find which sensor it is and then replace that sensor accordingly.

The location of the Dynamic internal sensor: It is located in lower part of the centre console . exactly on the right side of the air bag module.




REMOVAL


1. Disconnect and isolate the battery negative cable from its battery post.
2. Remove the instrument panel center stack console.






3. Roll back the front floor carpet from under the instrument panel toward the rear of the vehicle for access to components.
4. Remove the fasteners (2), then instrument panel center support brackets (2). There is one bracket on each side of tunnel structure.



5. Disengage the right intermediate floor distribution duct (2) from the stud located on the floor support (3) and move it aside as necessary to access the dynamics sensor.

1. Disconnect the wiring harness connector (3) at the dynamics sensor (2).
2. Remove the screws (1) mounting the dynamics sensor to the mounting bracket on the floor pan tunnel (4).
3. Remove the dynamics sensor (2).

Hope this helps.

Hi there:


DTC C2204 - Dynamics Sensor Internal

This light is on most likely due to a speed sensor failure. Either the rear one in the rear diff housing or the right or left front speed sensor. You will need someone with a full level scan tool to scan the ABS module to find which sensor it is and then replace that sensor accordingly.

The location of the Dynamic internal sensor: It is located in lower part of the centre console . exactly on the right side of the air bag module.




REMOVAL


1. Disconnect and isolate the battery negative cable from its battery post.
2. Remove the instrument panel center stack console.






3. Roll back the front floor carpet from under the instrument panel toward the rear of the vehicle for access to components.
4. Remove the fasteners (2), then instrument panel center support brackets (2). There is one bracket on each side of tunnel structure.



5. Disengage the right intermediate floor distribution duct (2) from the stud located on the floor support (3) and move it aside as necessary to access the dynamics sensor.

1. Disconnect the wiring harness connector (3) at the dynamics sensor (2).
2. Remove the screws (1) mounting the dynamics sensor to the mounting bracket on the floor pan tunnel (4).
3. Remove the dynamics sensor (2).

Hope this helps.

po 1391 is crankshaft sensor or cam sensor change crankshaft sensor

i am a chrysler dealership technition and with out diagnoisis i can tell you that 99 percent of these are a bad sensor it is located in the center of the vehicle under the center console and it affects abs and stability system. to change it you remove console take 2 10mm nuts off unplug sensor remove and reinstall.

What signal is this? is this for a check engine light code?Okay i know what you mean, it a p0073 code, this is the ambeint temp sensor,this is the sensor that tells you the outside temp on your display, the sensor may be bad ,misssing or bad wire going to sensor,was this van in a crash, lots of times the sensor gets damaged from an accident,

You always need to check the wiring system when you get a code and not just throw parts at it,I'm sorry this happened to you.

3.3 engines has the egr valve with transducer.you have to replace the whole unit. code p0406 what its trying to tell you your egr valve circuit is short to ground.it has failed .