Here's an image of its location.
I have a 06 hyundai and all my power windows dont work i put them down now they dont work checked fuses relay tested wires ??
SOURCE: Remove door trim to replace power window switch
you dont have to take the trrim off on this car look at the outline of the switch open from rear and pull forward then you can change the window switch/ Please rate my response thank you very much
SOURCE: P0139 code for a 2003 hyundai elantra. What is this code?
P0139 HO2S Circuit Slow Response (Bank 1 / Sensor 2). This is the downstream sensor (after the catalytic converter). Odds are the sensor is going bad. Check connections/ connector to this sensor. If you don't find any problem/trouble with this connector, replace the O2 sensor.
SOURCE: need power window diagram for 2000 hyundai elantra
is this what your looking for??
Front Door Glass:
SOURCE: 2003 Hyundai Elantra GLS. Check engine light, code PO133
Did you use a aftermarket O2 sensor or a genuine Hyundai one? If it's an aftermarket one it may be bad or not as good as the OEM one. See here for more details and other potential causes: P0133
SOURCE: 2003 Hyundai Elantra - diable alarm
YES!... with various system operating difference. Disconnecting the alarm does not disable it.. it only silences the alarm. You will still need the Keyless Entry System Remote to RESET the alarm to start the vehicle.
6,318 views
Usually answered in minutes!
×