Tip & How-To about Chevrolet 1500

Homemade noid light for checking injector pulse

Making your noid light tester take any lightbulb and socket from a reverse light or markerlight that has a 194 bulb for the light older cars are the easiest to find like the license lpate light assy easy to get to use this leave yourself about 4to6 inches of wire on each lead then you can olug it in to the injector plug on any vechicle one wire in each side of connector then when you crank over the engine this light will flash on and off showing that the injectors are being fired this will be helpfull in checking no start problems no pulse usulyy means cranksensor problem or on older cars with distributors that there is a problem with the control module tis will work on any vechicle

Posted by on

Cars & Trucks Logo

Related Topics:

Related Questions:

1 Answer

what size or what kind of light do i need for my chevy impala 03'the back white light is out, not the red light ANSWER ASAP


It is called a 'reversing light'.

Reverse Light Replacement 2000-2005 Chevrolet Impala - 2001 ...

https://www.carcarekiosk.com/video/2001_Chevrolet_Impala.../lights/reverse_light
The reverse light is the white light that lights up when your Impala is in reverse. The video above shows you how to change the reverse light in your 2001 Chevrolet Impala. These bulbs burn out occasionally and help you see when you are backing up. The reverse light gets dimmer over time and we suggest changing them ...

How to Replace Backup Lights on a 2003 Impala ' It Still Runs ' Your ...

https://itstillruns.com > Maintenance The backup lamps on your 2003 Chevrolet Impala are located in the applique on the rear of the trunk lid. The backup lamp replacement process involves removing the applique to access the bulbs. The entire process is relatively simple and straightforward and only requires the use of a socket wrench and a replacement ...

Chevrolet Impala Back-Up Light Mini Bulb - AutoZone

https://www.autozone.com > ... > Chevrolet Impala Headlights And Exterior Bulbs Chevrolet Impala Headlights And Exterior Bulbs. ... Vehicle Specific Sylvania Back-Up Light Mini Bulb. ... Vehicle Specific SilverStar Back-Up Light Mini Bulb.

2003 Chevrolet Impala Car Lightbulb Size Diagram - Modified Life

www.modifiedlife.com/2003-chevrolet-impala-car-lightbulb-size-diagram/ When you need to replace the headlight, turning signal or parking light bulb on your 2003 Chevrolet Impala, finding out what the replacement size you need can be a time consuming task. Whether you want to replace your headlamp bulb with a HID (High Intensity Discharge) Headlight Kit, Xenon Headlamp Kit or replace ...

Pictures in the link
2003 impala reverse light bulb Google Search

Dec 04, 2017 | Cars & Trucks

1 Answer

when i turn my headlights on,fuse blows for tail lights,markerlights, dashlights


The most common cause for that problem is a short circuit in one of the stop light bulb sockets. Try removing all the stop light bulbs to see if one of them is melted in the socket and replace the bulb or socket if necessary.

Aug 14, 2011 | 1991 Jeep Cherokee Briarwood

1 Answer

My right reverse light on my 97 camaro has stopped working...I've replaced the bulb multiple times. The left one works fine.


When this happens there are a couple of things to do. First of all trace the ground wire back to where it is attached to the frame from that right light. Check to make sure that there is no corrosion or a weak connection there. That may have solved it. If not, remove the bulb and clean the bulb socket with the eraser end of a common pencil. If that doesn't solve it test that socket with a 12 volt tester to see if you have power there. If not, replace the socket.

Mar 17, 2010 | 1997 Chevrolet Camaro

1 Answer

How to replace the console light in a 2002 Nissan Sentra GXE?


Remove cover for storage bin under stereo. One hand on each side and pull towards trunk. Remove cup holder, pull up to remove shifter cover. The light is located under the shift indicator on the left. The black component will pull up but wire for light is short so use caution and try to remove light socket with out fully removing indicator. Light bulb is a #194 or peanut bulb. Pull bulb to remove. Reverse to reinstall.

Jan 31, 2010 | 2002 Nissan Sentra

1 Answer

HOW DO I CHANGE A MARKER BULB ON MY 1996 TOYOTA CAMRY


OPEN THE TRUNK AND REMOVE THE PANEL INSIDE THE TRUNK THAT IS ON THE INSIDE OF THE REAR TAIL LIGHT .THE MARKER BULB IS THE BULB SOCKET THAT FACES AWAY FROM YOU (WHITE PLASTIC SOCKET) TWIST IT TO THE LEFT AND PULL, THIS WILL RELEASE THE SOCKET AND EXPOSE THE BULB. SIMPLY PULL THE BULB (PART NUMBER 194) OUT OF THE SOCKET AND INSTALL A NEW ONE. INSTALL IN REVERSE ORDER

May 12, 2009 | 1996 Toyota Camry

Not finding what you are looking for?

5,140 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

84524 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22483 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Loading...