Whirlpool Washing Machines - Page 2 - Answered Questions & Fixed Issues
Whirlpool washer spin cycle drum banging on side
Well you have done everything that you can do and expertly tested and diagnosed. The problem is doing all the towels together. The only way to fix is mix towels with other laundry or buy a front loader because the tumbling action evens out the load better.
10/1/2023 6:02:28 PM •
Whirlpool...
•
Answered
on Oct 01, 2023
•
58 views
Washer somehow got into "control locked" mode and
Hello Shane, welcome to FixYa.
Based on your information posted..."control locked" mode and I do not know how to unlock it" ...this is a fairly common problem with these washers (including Whirlpool, Kitchen Aid, Maytag, Amana, (some)Kenmore to name a few built by Whirlpool) I hear about both on-line and doing on-site service.
The solution, however is usually pretty simple. As long as your washer is indeed the Whirlpool GHW9150 give this a try and let me know how it goes.
Press and hold the "END OF CYCLE /CYCLE SIGNAL" button as you count to 15...this will reset the control.
Good luck. Let me know how you make out as I said and if I can help you in any manner going forward I will do whatever I can.
Thank you for choosing FixYa. Please take a moment to rate the info provided here and a testimony on your experience here at FixYa today is appreciated.
Regards,
Macmarkus :)
Whirlpool duet washer sport ht - error codes
FYI: The pump cleanout is located on the front of the machine, bottom right corner. There are only three screws holding the bottom cover on. It is easy to get to if you prop it up a few inches off the ground. Just thought this would be helpful as I just did this as of 5 min ago. Should take 10 min. or less.
Pause mode stuck
Is the door firmly closed? Open the door and close it firmly. If the pause button is really stuck, you will need to repair/replace the board.
Not finding what you are looking for?