Whirlpool Washing Machines - Page 9 - Answered Questions & Fixed Issues
F02 Washer not draining.
"F02" is a Long Drain error. If the drain time exceeds 8 minutes this error code will be displayed. In addition, a "SUDS" error may also be generated as a secondary error. This is an indication of a drain pump problem and/or clog in the drain line. You will need to check the following:
1. Check the drain hose to make sure it is not kinked or clogged.
2. Check the electrical connections to the pump and ensure the pump is running.
3. Remove the drain pump filter and check for foreign objects and/or debris.
To check the drain pump, click on the following link for step-by-step instructions.
http://www.fixya.com/support/r385844-checking_drain_pump_kenmore_elite_front
If the above procedures do not correct the problem, it is recommended by the manufacturer to replace the drain pump
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.&$&$&%&
Instructions for thor th 85 washing machine
Hi I just bought a second hand THOR TWM800 washing MACHINE, do you knowwhich setting i should have the dial on to have a simple wash and dry clothes? Machine washes but doesn't dry.
12/21/2021 10:10:39 PM •
Whirlpool...
•
Answered
on Dec 21, 2021
•
220 views
My whirlpool clothes washer starts agitation as soon as i start the wash cycle
Front loaders always do, top loaders sometimes do. With a top loader, you can start your cycle and then add your clothes.
With a front loader, the idea is that the detergent is being washed out of the detergent drawer, and to stop it all landing on one garment and sitting there, the drum rotates to spread the happiness :>D
12/2/2021 7:27:14 PM •
Whirlpool...
•
Answered
on Dec 02, 2021
•
106 views
Whirlpool cabrio will not spin
If your Whirlpool Washer is not spinning the problem is almost always the lid switch. If the lid switch is bad you will not hear the motor running when in spin. To check the lid, first unplug the washer.
11/25/2021 12:49:50 PM •
Whirlpool...
•
Answered
on Nov 25, 2021
•
110 views
F47 ERROR CODE ON INDUCTION COOKTOP
the dreaded F47 error is a common failure with this models burners. If it is under warranty, you need to have it returned or get a service tech out.
11/3/2021 6:47:40 AM •
Whirlpool...
•
Answered
on Nov 03, 2021
•
24,690 views
After each load of laundry, my Whirlpool Cabrio washer has brown-gray oil deposits in spots on the white plastic bottom of the tub.
Unfortunately it goes with the territory of buying top loader machines. Underneath the agitator is a gearbox and clutch full of waterproof grease. It is below the water so there has to be seals to stop ingress of water. Your seals need replacing. It is not really a job for the home mechanic as all of the case has to come off, the drum lifted off to even get to the gearbox. It also needs custom tools. I had a clutch replaced under warranty and sat in the kitchen watching the engineer. When It came time to replace our dryer, I bought matching Whirlpool front loaders and they actually take more clothes and use a fraction of the water and electricity.
Costco won't touch your claim because it is well out of Whirlpool Warranty. It is part of wear and tear and maintenance. A good service engineer can do the job in about an hour and a quarter. Tell them the story and you have been advised it is probably the seals to the clutch and gearbox.
10/27/2021 2:32:42 PM •
Whirlpool...
•
Answered
on Oct 27, 2021
•
84 views
Not finding what you are looking for?