Technics Audio Players & Recorders - Page 6 - Recent Questions, Troubleshooting & Support

Depends what the issue is.

Technics Audio... | Answered on Aug 23, 2018

To be honest most people simply replace the keyboard than try and fix them. They are not expensive. You could have a problem with the driver for the keyboard, so you could update it. That's worth a try before chucking the keyboard!

Technics Audio... | Answered on Aug 12, 2018

Hi if u have checked everything out
the only thing left is to replace the
IC.amplifier chip which is bolted to the large silver heat sink...when u replace make sure u put some new heat sink compound on the IC ..if u don't know how to use a soldering iron properly don't attempt to do it u can easily destroy the new IC chip with heat .cheers

Technics Audio... | Answered on Aug 12, 2018

The unit probably went into protect mode to prevent damage to the output stages.

Technics Audio... | Answered on Aug 07, 2018

First, I'm not a Technics tech.
* Normally I would suggest to check for warranty, but this unit is outdated.
* Try to contact ;
*** The following is for information only.***
* The following vid shows the speed switch on the left. If it's not tracking then there may be a problem in the selector switch, sync tracking, or motor drive.
* You may want to check the "window" or sensor of the the speed sync light (the orange light). Wipe down the lamp and the peep hole where the sensor is located (on or near the lamp)
* Wipe down the outer edge of the turn table to clean the metal "dots" or "bars" on the rim. This is what the sensor reads to determine speed.
* Speed controls and direct drive turntable are not customer serviced parts (other than replacement of the component).
* Example of play;
* Closer look at auto play feature;
* SL-1510 Mk2 repair;
* SL-1900 repair;
* SL-1210 repair;
* SL-23 repair;
* Repeating Return problem;
* SL-1200 Speed changes(sync);
* SL-1300 Speed problem;
* SL-1200 Very DEEP level repair;

Aloha, ukeboy57

Technics Audio... | Answered on Jul 11, 2018

Remove the screws to the case. There are usually 2 on each side and 6 or 7 on the rear. You will find one disc has come out of its circular depression.

Technics SL PD888 5 Disc Changer

Technics Audio... | Answered on Jun 25, 2018


I had the same system... still have the remote if you're interested in it?
Regards, Gary.

Technics Audio... | Answered on Jun 22, 2018

Fixya is unable to suggest sources for a Technics EX 140 power module.

Technics Audio... | Answered on Jun 15, 2018

Not finding what you are looking for?
Technics Logo

4,102 questions posted

Ask a Question

Usually answered in minutes!

Top Technics Audio Players & Recorders Experts


Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76204 Answers


Level 3 Expert

85219 Answers

Are you a Technics Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides