Technics Audio Players & Recorders - Page 2 - Recent Questions, Troubleshooting & Support

Fixya does not sell Technics parts.

Technics Audio... | Answered on Sep 17, 2019

replace the 3 electrolytic capacitors in the power supply section near where the lead from the transformer connects to.
they're sat side by side.
you may notice only 1 might be leaky but replace all 3 for good measure.

i've had quite a few with exactly the same fault and all were cured by replacing the above.

hope this helps?

Technics SH-GE90... | Answered on Sep 07, 2019

Hi David, I sent you a link where they are offering the hinges for the cover of your SL1900
Hope this can help you
Regards Franco Dosil

Hola David, te envio un link donde estan ofreciendo las bisagras para la tapa de tu SL1900
Espero que te sirva
Saludos Franco Dosil

Technics Audio... | Answered on Sep 03, 2019

Hi Les, as a first step, I would disconnect the speaker cables in the Technics su-x501 and test if the same thing happens, if so, there could be a problem with the power supply or also with the speaker output
If it does not turn off, then I would start checking the speaker cables, along the way, in case there is any peeling, which could cause overheating
Once the cables were checked, I would connect the speakers one by one and test with each new reconnection until the source of the fault was detected
I hope you can solve the problem
Regards Franco Dosil

Hola Les, como primera medida, desconectaria los cables de los bafles en el Technics su-x501 y probaria si pasa lo mismo, si es asi, podria haber problema en la fuente de alimentacion o tambien en la salida de parlantes
Si no se apaga, entonces comenzaria a revisar los cable de los bafles, en su recorrido, por si hay alguna peladura, que podria generar un recalentamiento
Una vez revisado los cables, iria conectando de a uno los parlantes e iria probando con cada nueva reconexion hasta detectar el origen de la falla
Espero que puedas resolver el problema
Saludos Franco Dosil

Technics Audio... | Answered on Aug 25, 2019

Hi Thomas, as you say, it's not the engine, nor the integrated engine
Most likely, the pitchel potentiometer that generates the problem
I would try to clean it, applying a small amount of contact cleaner and test if there are improvements
Keep in mind that it is the Pitch potentiometer that is changing the speed
Comment if the suggestion served
Regards Franco Dosil

Hola Thomas, por lo que comentas, no es el motor, ni el integrado del motor
Lo mas seguro es que el potenciometro de pitch el que genera el problema
Yo intentar?a limpiarlo, aplic?ndole una peque?a cantidad de limpiador de contactos y probar?a si hay mejoras
Ten en cuenta que es el potenciometro de Pitch el que va modificando la velocidad
Comenta si sirvi? la sugerencia
Saludos Franco Dosil

Technics Audio... | Answered on Aug 22, 2019

It sound like the main power amp has failed. Look at whatever is on the big heatsink as to the cause. As with any device from "friends" it could be that someone has tried to fix a fault and made a mess. So look carefully at the soldering to any of it's parts.

Technics Audio... | Answered on Aug 18, 2019

Immediate the machine switch off then you will see the F61

Technics... | Answered on Jul 18, 2019

Hello Denis, I sent you the link where you can get the manual for your Technics SXE 11
I hope it helps you
Greetings Franco Dosil

Hola Denis, te envio el link donde puedes conseguir el manual para tu Technics SXE 11
Espero te sirva
Saludos Franco Dosil

Technics Audio... | Answered on Jun 21, 2019

Not finding what you are looking for?
Technics Logo

4,104 questions posted

Ask a Question

Usually answered in minutes!

Top Technics Audio Players & Recorders Experts


Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76204 Answers


Level 3 Expert

85222 Answers

Are you a Technics Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides