Speed Queen Washing Machines - Page 3 - Recent Questions, Troubleshooting & Support
How to change the hub seal of a top load speed queen wwashing machine . Model AWM 351W - 3062
You could try calling Speed Queen Support at 800 552 5475. They may be able to walk you through it or send you a document. I have used them as my SQ wasn't spinning up to high speed, so the cloths came out wetter and wouldn't dry in the dryer. I called them and they told me how to diagnose the problem. The cause was that the belt is loose and I'll need a new belt. Another guy told me it was the motor which was a much more expensive fix, and not something I believed..good thing. So give them a call.
My speed queen has a problem with the inlet of cold water ?
Change out the water valve. The water valve is what the water hoses are hooked up to on the rear of the machine. This is a pretty easy replacement. The new one goes on like the old one comes off. Turn the water off and disconnect the water hoses from the back of the machine. Sometimes there is one hex head that is removed and the valve tips out for replacement. Depends on the year and model.
Washer is overfilling & leaking
Are you using front loader only detergent?(oversudsing) Overfilling is either a pressure switch, or pressure chamber is blocked(located toward underside of outer bowl approx 6 inches long) this is only in older machines with extensive cold washes.
Not finding what you are looking for?