tes the charger in another receptacle wall, if is ok , test the receptacle wall if is open, reset the circuit breaker .
if his system use batteries replace, or see if they are o.k use alkaline only.
Other is everything is o.k see if the board is fault or look for some wires loose, or disconnect.
Let me know
Blessing
[email protected]
cell+whatsApp: +50588611441
1) Try to measure the if there are 110Vca in the terminal in forward or reverse.
2) Try to measure the ESR from Capacitor and replace it.
3) If you system as LIMIT Switch , test for continuity with DMM for faulty and replace, or some wires loose or disconnect.
4) If you system are Relais see if the relais for UP and down, and working most of them has LED that will be LIT indicating working or NOT
5) If NOT voltage Vca are NOT, coming from The Controller Board Motor, REPLACE IT,
Control board motor has 3 power supply: 1) Console board 2)Elevation Motor 3) Main Motor.
Some IGTBs are Defective.
Blessing.
[email protected]
cell+whatsAPP:+50588611441
LED Blink Patterns on the Control Board Treadmill