Life Fitness Exercise & Fitness - Page 8 - Recent Questions, Troubleshooting & Support
Treadmill wont run its saying waxer empty and
Does this treadmill have a wax system ? If it does it will have side access panels on the side just above the rear leveler. The picture that shows here does not but need to be sure it does not really need wax.
If it does not have a waxer- enter maintenance settings on display console,I do not have one in front of me but I believe you hold pause button down and press clear twice. This should bring up maintenance settings.
Scroll using up down arrow untill you see replace wax bag or something to that effect. select [enter ] to save. press clear clear to restart.
Very noisy and clangs a lot , can I do anything to fix the loud noises?
I haven't seen that exact model myself, but i work on a variety of things for people and have had customers with the same complaint. my usual remedy is apply some 3-in-1 oil or even wd-40 lubricant to the parks that squeak and clank as long as no electronics are nearby to get covered, if so just take precautions not to spray your logic boards, powersupply, etc. and if and when possible, i like to use small pieces of foam stuffed into certain cavities in the plastic as long as they wont get caught in any moving parts or impede the electronics. keep in mind this wont make it completely 'silent' but it will reduce the noise factor slightly, and the lubrication may very well make the bike itself perform more smoothly.
I WANT TO CHANGE KILOMETER TO MILe
Hi There,
Give this a try....go to Sportsmith.net and/or google Service Menu Life Fitness 95Ti. Once in the service menu, there should be an entry for the user to select Miles or Km.
It mentions pressing/holding the Pause Button until the Service menu appears on the display. Good Luck!
Our life fitness 9500hr recumbent bike stopped working
If this unit has not been used for that period of time then the 6v batt has died ans needs replacing call National Gym Parts @ 1-800-496-7278 to order part# LC001.5
HERE IS THE PROCEDURE TO REPLACE THE BATT:
Tilt the bike on its side, remove mounting screws securing the battery to the bracket. Remove the battery just enough to access and disconnect the black (neg) wire from the (-) terminal and the red (pos) wire form the (+) terminal. Replace battery and reverse procedure when installing battery
Not finding what you are looking for?