Questions & Answers for: wipers will not turn off

...wipers will not turn off, I've replace the turn signal/wiper switch and still not turning off 2000 Cadillac Deville, Windshield wipers not turning off, I replaced the turn signal/wiper switch, and ...

...Wipers Continue to Run When Turn Signal and Windshield Wiper Switch Are Turned OFF Damaged turn signal and windshield wiper switch . Damaged windshield wiper motor . Damaged windshield wiper control ...

...wipers stand straight up when turned off,is it the wiper motor or something else? Its just the wiper motor if your using your wiper and you want to turn off the wiper wait until the wiper go back to ...

...turn off and restart need to check the intermittin wiper relay and try unpluging the wire under the dash that go to the wiper switch if the wipers continue to go haywire then its the wiper relays ...

...turn ignition OFF when wipers are stopped in the innerwipe position. Push the wiper blade clip button IN and remove wiper blade from wiper arm. To Install: Insert wiper arm hook through opening in ...

...TURN OFF. WIPERS SHOULD TURN OFF. CHECK WIPER RESERVOIR MAKE SURE ITS FULL AND WIPER WASHER SPRAY FLUID CLEAN WINDSHIELD. IF WIPER MOTOR DO ALL THE ABOVE THEN ITS OKAY.IF WIPER MOTOR WORKS SLOW LOOK ...

...Turn on wipers. When the wiper moves all the way to the left and starts to go back to the right turn off the ignition with the wiper switch still on. Remove the right wiper arm and install the left ...

...turn wipers off after they are turned on Since the ignition switch has to kill the power to the wipers. Replace the wiper switch. Carbon build up inside the switch is why it won't turn off. You could ...

...turn the wipers on, shut the car off when the wipers reach their full down position. Turn the wipers off, the. Turn the car back on. This should relearn the wiper index. This can happen if the wipers ...

My Caprice model 2005 V8 whiper fuses blowing out.need to know reason HI, turn off everything ,make sure wiper switch is in off position, unplug the wire connector to the wiper motor(install new fuse)