Questions & Answers for: white marks

...you will be dealing with one video cable (marked in Yellow), and two audio cables (marked in White and Red) Red is right channel and white is left channel if stereo, if mono use the white ...

marks i have a honda civic 1990 1.4gl, i need to know which mark on the crankshaft pulley is tdc, there are 3 lines with a red mark and two lines with a white mark. the red mark is where the timing is

...next step you need to do is: check your game consul cable it should have a 3 RCA cable having RED/WHITE and yellow marking. RED and WHITE cable marking stands for "AUDIO" YELLOW cable marking ...

...marked BLUE PHOTOCELL (any order) -Motor red wire plugs onto terminal marked MTR MAIN, motor white wire plugs into terminal marked WHITE MOTOR. -potentiometer (thing with knob) two white wires ...

...and on completion, I put the timing light on to check the timing, I noticed only one timing mark white, no yellow. Also on gradual acceleration the timing mark on crank pulley jumps abruptly about ...

...of door and panel above door. This was a perfectly white oven. It works perfectly fine. how do I prevent the white stove from having burn marks after the cleaning cycle? Or how do I get them

when setting timing on a 1992 honda accord what is the diffrence between the red and white mark. The RED mark is the timing mark and the WHITE mark is for Top Dead Center for #1 piston.

...white for reference. align cam timing marks, then align crankshaft mark with #0 on timing scale. Adjust tensioner and belt is aligned. I recommend changing idler pulleys and water pump when replacing ...

...error E000007-0000.what is that problem? Check The Fixing Unit Film. Replace Fuser Film. The White mark of Fuser Film must be place in write side. The White mark reader sensor must be free

...most likely a pair of 'Phono' jacks. Round connectors, one marked in red and the other marked in white. It may be marked as a "AUX OUT", "PHONO OUT" or "AUDIO OUT". On the back of the System on