Questions & Answers for: traction control abs sensor oldsmobile

...A common cause for a Traction light is a faulty front ABS wheel speed sensor or harness. When the Anti lock brake computer sees a problem in the ABS syetm, it disables traction control as

...traction control is off The first thing i would check is all 4 abs sensors at the wheels.You can do this with a volt meter set on ac voltage and spin the wheel if it generates voltage at all on the ...

sensor. A common cause for a Traction light is a faulty front ABS wheel speed sensor or harness. When the Anti lock brake computer sees a problem in the ABS syetm, it disables traction control as well

...Traction Control system lights are on. What could it be? those lights come on when the system is shut down by the computer. You have to scan the abs system. It is usually one of the sensors. I have ...

traction control off light is on I replaced all four hub and bearings and now the traction control off light is on and the abs light is also on and the traction control wont activate Thanks Each wheel

...traction control not working Have the ABS codes scanned. More than likely one or more of your wheel speed sensors are not reporting correctly. This will tell you where to look next. If you have a ...

...traction control both use the information from the sensors. In my shop it is usually a broken wire to one of the front sensors or a bad sensor in one of the four wheels. The sensors are part of the ...

...traction control is on because the abs light is on.System requires the abs to be actively working for traction control to work.The most common cause of this is a wheel speed sensor which on this ...

...after changing brakes and rotors. check the abs sensors common to hit or damage the wiring or knock connection loose when doing a brake job the traction control system[tcs] is tied into the abs ...

...traction control lights will also typically illuminate. Your best option is to have the ABS system scanned to see what is causing the light to come on. Once you know the code(s) it will be a lot ...