Questions & Answers for: my tma amp is overheating how do i fix it

tma problem my scanjet 3970 diplays that it has a problem with tma, Light in cover had failed,fitting a new cover solved problem.

...fine. First thing you can try is to disable/shut down the Spysweeper and then try scanning with TMA. If that still doesn't work, I would uninstall the Spy sweeper and try scanning with TMA. If ...

...Many thanks Tony Step 1: Open the scanner lid and remove the Transparent Materials Adapter (TMA). Step 2: Place your slides or negatives into the appropriate template. Follow the orientation ...

...tma amp and a pyramid amp is it safe to connect the pyramids power wire into the terminal of the tma where my power cables connected or do i have to distribute block it my power cable runs into tma ...

...' IN HP SCANJET 8270 AND THE POSIBLE SOLUTIONS... THANKS If LCD displays Error 06 or Error 09 , the TMA might require service Press SCAN PICTURE button once (see Figure 3 above). The TMA lamp should ...

scanjet g4050 TMA lamp does not move upand down lid Sorry to say, there is no solution to this fault. HP are not interested in it (even though I have proof, in a faulty slide copy, that it was there ...

...amp; jl audio 500/1v2? why is the price range so different? 500/1 is JL upper line, and the 500.1 is their lower line. They also have another line altogether that is under a different brand name. i ...

...TMA amp is overheating it runs for ten min and it gets so hot you can fry an egg on it how do i fix this problem. i have checked all the fuses and they are all fine. please help. Sounds like you may ...

TMA doesn't work ;code 22 Scanned several negatives, then stopped and displayed code 22. If 22 is blinking in the Scanner LCDThe Transparent Materials Adapter (TMA) may be attached incorrectly or ...

...tma sensor error You will have to contact LEXMARK but here is a link to their support section. ...