Questions & Answers for: timing pe770 machine

I was able to download designs to my computer using a flash drive the first time. I attempted to download again for the second time using the same flash drive. I plugged in the flash drive, pressed ...

discoloration on thread while embroidering i have a lot of thread underneath the finished product and sometimes the top thread has a dark discoloration. the thread seems to shred or unravel at times ...

...PE770 is not being caught by the bobbin. Just getting loose strand of thread. Was sewing perfectly, then it wasn't. Changed thread, needle, bobbin, fabric, stabilizer rethreaded many times, ...

...PE770 embroidery machine and cannot replace a needle that easily. Any tips besides the flat side going in the back. I tried with a mirror and the large tweezers but the needle will not budg My needle ...

The safety device continues to activate on my Brother PE 770 I have cleaned and checked the bobbing and the safety device continues to activate every time I sew. It sounds like something is grabbing ...

My Brother PE770 won't read my USB USB thumb drives can begin to have problems with their formatting over time. Try taking off all your files and formatting it with a PC. I have a Mac and ...

...PE770 is brand new. the top thread keeps breaking after about 1.5 letters. Usually right before it breaks it will start skipping stitches leaving a gap in the letter. I have tried increasing and ...

Error message Why does check and rethread upper thread keep reoccurring? Try changing your needle, make sure there is no thread caught in the looper, and maybe use different thread brand. My machine ...

brother PE770 thread keeps breaking and top thread is bunched under thread keeps bunching under material and breaking-have changed needle, changed thread, retreaded an hundred times and rewound bobbin

Model PE770. Why does the needle keep getting stuck and the hand "crank" is really hard to turn? could be a timing problem or a broken part, if the problem continues the machine needs to be checked