...mechanism and now I can't get it back in, I made sure the arrows and the N in front lined up (that seemed to be the neutral position indicator) I still can not completly slide the unit back in. Ack ...
Question about Royal Digital Plus Coffee Maker/Espresso Machine
...slide out, so I tried to pull a little bit harder, but it wouldn't budge. Eventually, I removed the tray grate and can see that there is some black locking mechanism that has latched onto a notch at ...
...mechanism? Remove the dredge drawer. Open the door. On the left side of the brewing unit, and towards the back of the brew group, there is a single screw. Remove the screw. Grab the handle and pull ...
...mechanism is out of synch with the motor. How do you reset the motor to the starting position so that I can reasemble it? These are the directions for removing a stuck brew group. If the brew unit is ...
...mechanism and it needs to go back. Follow these directions. To return the brew group to the centered position, you first need to drop the funnel. To do this, look on the opposite side of the brew ...
My Saeco Armonia machine stopped working--no power. (Yes, it's plugged in, and I tested the outlet). How/where can I fix the power? The machine is about 4 years old, and had no other problems. Hi ...
Question about Vienna SuperAutomatica Coffee Maker/Espresso Machine
cannot slide back in the operation part When you slide it back in, press the wide plastic button so it will slide on completely.
Question about Vienna Espresso Machine
when plugged in - power to outlet works on other appliances - when I turn the "on button" on NOTHING happens Sorry, I cannot solve this problem. I know about the mechanics of the Vienna, not about the
Question about Odea Go
I removed the brew group and it is now stuck in the remove position. I cannot replace it in the machine. The lever that says push is stuck in the pushed position On the inner side of the brew group ...
Question about Odea Giro Plus Coffee Maker
My steam wand does not work when it is tilted down, it only works when it is tilted up about 75 degrees and up. Why is this happening? I tried a descale the machine, and I tried to run hot water ...
Usually answered in minutes!
440 Questions
417 Questions
393 Questions
348 Questions
266 Questions