Bobbin thread is pulling to the top, using embroidery needle, bobbin thread and proper thread on the top. As far as I know the machine is set right. This might not be the right place to ask, but am ...
...threading. If sure it is threaded properly, especially going through the tension assembly...check your thread. I have found that the thread you use can and often does create tension problems. Try ...
burnette 65 bobbin tangling can't adjust thread tension have replaced the bobbin and tried adjusting thread tension but bobbin thread continues to knot up and tangle regardless of tension or material ...
My bobbin threat is bunching and after a couple of inches, the top thread breaks. Check that the thread is tight around the bobbin. Make sure that the bobbin is in the right way around - the bobbin ...
bOBBIN THREADING ON BERNINA 1090S IS NOT WORKING THE THREADER FOR BOBBIN KEEPS CUTTING THE THREAD RATHER THAN WINDING IT Make sure bobbin is pushed all the way to the right to lock in place for ...
Question about Artista 180
I have a faithful 730 Bernina and currently the bobbin thread keeps breaking. Please advise what may be causing this. Thanking you. My faithful 730 Bernina is currently breaking the bobbin thread. Can
The top thread does not pull up the bobbin thread Is the bobbin thread through the needle eye? If not then it needs to be there. The top thread doesn't pull it. when you fill the bobbin bobbin thread ...
Question about Activa 130
bernina activa 130 tension loose after needle breaking into bobbin area I was repairing flannel pajamas and sewing through several layers of fabric and the needle broke. Found one end of the needle in
Question about Artista 640E Sewing, Quilting and Embroidery Machine with Embroidery Module
my machine keeps showing the bobbin error but there is nothing wrong in the bobbin I have cleaned and oiled the bobbin. I have rethreaded the bobbin and the needle. I have confirmed that the bobbin is
Question about Artista 640E Sewing, Quilting and Embroidery Machine with Embroidery Module
Bernina 750 QE bobbin issues. Top thread tangled up under fabric. It was wound so tight with bobbin case than when I was finally able to jiggle it out,the little metal wire pops off. Wire back on. ...
Usually answered in minutes!
64 Questions
435 Questions
168 Questions
165 Questions