Questions & Answers for: threading a bobbin

Ad

Question about Office Equipment & Supplies

1 Answer

...threading. Step 2--Place empty bobbin on bobbin winding spindle. This spindle will be located on front right, on top right, or on either side of machine. The spindle may have to be repositioned for ...

Ad

how to thread the bobbin on a singer simple sewing machine how to thread the bobbin Drop-in bobbin: Note: thread must change direction when entering bobbin shuttle notch. Usually bobbin will turn ...

Ad

Question about Shark 60 - 384

1 Answer

How do you load the bobbin properly? Hi there, Well you may please follow the steps below - 1. Remove the bobbin from the sewing machine. Note: whether you have a drop-in, front or side-loading bobbin

Question about Shark 60 - 384

1 Answer

I own a "Lena" machine I own a "Lena" machine and after cleaning the entire bobbin area cannot get the bobbin to feed up and only have the upper thread. Hello Make sure your feeddogs are up.

Question about 5050 Mechanical Sewing Machine

2 Answers

The upper thread is too loose and the bobbin thread is taken up too much It is the upper thread which pulls the bobbin thread up. If the bobbin thread is taken up to much, one solution is to loosen ...

I have a faithful 730 Bernina and currently the bobbin thread keeps breaking. Please advise what may be causing this. Thanking you. My faithful 730 Bernina is currently breaking the bobbin thread. Can

Question about 5050 Mechanical Sewing Machine

1 Answer

thread a bobbin on a 5825c If you mean the Singer 5285C, the manual is available from Singer here: http://www.singerco.com/uploads/download/449_5_6_8_10_slide.pdf . The diagram for winding the bobbin ...

Question about 5050 Mechanical Sewing Machine

1 Answer

Bobbin not working. I bought this machine used and it worked find until I decided to change the bobbin. Bobbin thread is not coming up. Upper thread wraps around the bobbin. I was told I had the wrong

Question about 7469Q - Confidence Quilter Machine

1 Answer

.... Winding the bobbin is on page 16; threading the bobbin at the bobbin case is on page 18. These pages have good pictures to go with the descriptions. I hope this helps. Cindy ...

Question about 7469Q - Confidence Quilter Machine

1 Answer

my bobbin thread breaks too much. How do I fix it. Be sure you are using the correct bobbin for your machine. Even though it appears to fit the bobbin case, if it is the wrong bobbin, it could cause ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...