Questions & Answers for: stripped wiper arm post

wiper arm drive assembly seems to be un hooked my wife turned the wipers on when frozen to the windsheild and now only the left one moves Grab the right arm and move it by hand. If the arm moves and ...

Ad

...wiper arm is stripped. If the post is not turning, then most likely an arm on your wiper assembly has come off, remove the wiper arms remove the black plastic cowl and you will find the wiper arm ...

Ad

...wiper arm. the little serrations on the inside of the arm's base get stripped, usually from turning the wipers on when they are stuck to the windshield by ice. if the little post is not turning then ...

Question about 2001 Grand Caravan

1 Answer

...stripped the matching serrations out of the base of the arm. Take your wiper arms to a junkyard and have them go out and get a couple of good ones which match yours. Note the left and right are ...

Question about 2004 Alero

1 Answer

...stripped out the soft lead mount at the bottom of the wiper arm. make sure the wipers are "parked", then carefully try to wiggle the pass side back and forth (its normal motion...). if it moves you ...

...stripped out. Remove the entire wiper arm and check to see if anything is stripped out. Also, with the arm off, turn on your wipers and check to see that the rod spins back and forth. You may be able ...

Question about 1988 D-Series Pickups

1 Answer

...wiper arm is stripped or the post on the linkage is stripped. Rmove the wiper arm that doesn't work. I think on this one if you look at the base of the arm you should see a small tab. Use a small ...

...and tighten the nut. The only thing that would stand in your way is if the arm connection or the post is stripped in which case you will have to replace the wiper arm, the wiper mechanism, or

...had problems with the post where the wiper arm attaches. The post will strip the groves when trying to move heavy snow. You will have to remove the arm, and reinstall it when the wiper switch is

...stripped wiper arm connections/post and/or wiper motor gear...or possibly bent operating assembly,,,first remove the arms from the post.they should have a small locking device just under the arm at ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...