...standard hand held microphone for this particular radio? (Connex 3300 240 channel export radio.) Pin 1 is Shield(most mics this wire is bare copper) Pin 2 is Audio wire(most mics this wire is white) ...
...standard radio with a cassette player. I would like to install a standard radio with a cd player instead. They have radio/cd players in other vw beetle models. Can you tell me where I could find a ...
...Standard Horizon QUEST+ GX1256S radio on, it goes into what seems like an endless scan mode. channels just flying by, won't stop. Have tapped the scan button on the radio, no change. Only when I tap ...
...Standard Horizon, I was able to figure out that the charge output needed to be 12VDC and 1A. Knowing this, at Radio Shack I found an Enercell 3/4.5/6/7.5/9/12VDC AC-to-DC Power Adapter (Product ...
...play any of them. The Bose Wave Radio doesn't have a CD player. The Bose Wave Radio/CD does. It will only play standard music CD's with standard CD Audio on them. The manual is available at
...radio, Your Name and Address and a copy of proof of purchase. Service Manual http://www.r-onetrading.com/download/standard/GX3000S_SM.pdf User Manual ...
Question about Standard Vx-231 Vx231 Uhf Handheld Two Way Radio
...standard oyher channels just keep beeping Hi, again Craig, Now that I have the Make/Model of your radio, I can give you advice. You wish to program your set with frequencies, so here is the best way ...
Question about HG-M73 Standard 4-pin Microphone
I bought 3o brand new standard cobra mics from an individual. The wire is not the standard color code. these mics do not work on cobra 4 pin radios. Whats up? These mics have a yellow wire that ...
Question about HG-M73 Standard 4-pin Microphone
...standard radio on no sound out of speakers By "standard radio" do you mean the low end version or do you just mean it's the radio that the factory installed? If your stock radio has a separate ...
Question about HG-M73 Standard 4-pin Microphone
Standard Horizon vhf stuck at screen message "EE-PROM initializing" It sounds as if the radio needs to be reprogrammed. It could also be a cold solder joint causing the problem but my guess is the ...
Usually answered in minutes!
980 Questions
644 Questions
497 Questions
317 Questions
274 Questions