...solenoid is there another name for this part. I cannot not find a whirlpool part with this name The part your are referring to is also known as a mixing valve. The mixing valve contains the cold and ...
...Mixing Valve on some washers) HOT solenoid is sticking open. When you select either a hot or cold wash cycle, separate solenoids open or close to allow only cold water to enter the washer on the cold ...
Question about DBSR453EBWW Electric Dryer
...mixing valve is most probably clogged or not working. Turn off the water supply and remove the fill hoses from the water inlet/mixing valve and check the screens, if there's any. Lime scales might ...
Question about Duet GHW9150P Front Load Washer
...mixing valve if one of the following is observed: The resistances of the valve solenoids are not the same; one solenoid is open, and the connection between the solenoids and the central control unit ...
...up, then when it is opened, all the water comes crashing out. The mix valve has a stuck cold water solenoid .The mix valve is not that difficult to replace an can be purchased for about 40.00 ...
Question about Duet GHW9150P Front Load Washer
...mixing valve solenoids aren't working. Is there a repair or do I need to replace the mixing valve? I would take the mixing valve off and try to clean it. If that doesn't work then you will ...
Question about Axxis+ WFR 2460 Front Load Washer
...mixing valves that mix hot and cold water simply to help dissolve the HE type soaps. If changing wash temp makes no difference then a continuity check for inlet water valve coil ...
Question about Axxis+ WFR 2460 Front Load Washer
...mixing valves that mix hot and cold water simply to help dissolve the HE type soaps. If changing wash temp makes no difference then a continuity check for inlet water valve coil resistance will have ...
...solenoid valve. We have echeck here, and supposedly the gas cap checked out fine. I think I may have the lines mixed up on the purge control solenoid valve. How can I know for sure? Any other ...
valve The heater and A/C programmer also controls the park brake release actuator. The powertrain control module (PCM) sends a Class 2 serial data message to the heater and A/C programmer whenever the
Usually answered in minutes!
1,743 Questions
1,329 Questions
1,410 Questions
1,123 Questions
940 Questions