...Sharp XR-10X Multimedia Projector was working fine. Now, it does not start up. The fan is not heard either. It has an indicator lit that always turned on when I turned on the device. Now, nothing ...
Question about XR-10X Multimedia Projector
XR-10x bulb timer has timed out. How do I reset the projector? I have replaced the bulb but the projector still will not turn on. indicator lights come on but no fan or power to the bulb. you need to ...
Question about XR-10X Multimedia Projector
...Sharp projector xr-10x-l - tried to change bulb - bulb purchased was to be for that projector - was larger - fit whithout some of the other brackets that held the smaller bulb - plugs in - fits it ...
...Sharp XR-10X bulb was blown and was changed. Now on attempting to power up the projector, the power LED comes on steady (green) and the lamp LED flashes (green). after a few seconds both LEDs are on ...
xr-10x lamp life on the projector Hold down the MENU/HELP, ENTER and down arrow buttons and press the standby/on button. Keep holding down the 3 above butons until the LAMP 0000H appears on the screen
lamp but SHARP XV-Z91E Projector Replaced lamp but timer will not reset . Followed reset code as per instructions. Any alternatives hold down menu, enter, and down arrow, then press power. this is the
Sharp XR-10X projector. Makes a loud whirring noise when trying to turn on. Bulb starts to turn on then doesn't. It's not the fans because I opened up the projector, disconnected the fans and it still
...sharp xr-10x L. I cannot get the bulb to turn on I have lights so there is power but the lamp is not on. You must reset the lamp timer. Check the manual or sharp website for instruction how to reset ...
Question about (AN-XR10LP) Projector Lamp for XR10X
Sharp XR-10X-XL projector, i have replaced the bulb but it still will not go on. The Stand by light and the bulb light are both on constant red, I have checked both the heat sensor and the fuse on the
...sharp XR-H325SA indicating lamp I replace tha new lamp but still indicating ineed to reset lamp timer but how? hi, for resetting the lamp hour do the following 1. Plug the power cord into the AC ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions