Questions & Answers for: sewing machine jammed wheel Vacuums

Sewing Machine Category.... Kenmore Sewing Machine Model 385.15512000 was dropped and now the hand wheel is difficult to turn The difficult turning is a symptom of a bent shaft, which is jamming on it

...sewing machine and there is a constant jam with the bobbin threading and I have cleaned it,removed the sewing plate and everything I can possibly think of. If the bobbin case is scratched would it ...

sewing something so thick that the machine does not tension the needle thread.The machine could be mis-timed. If it jammed and broke needles, the timing may have slipped. If this is the case, then you

...the problem but still no results)Is there anything else I could try? What is the model number of the machine? Have you tried sewing something else? This may be just a bad needle-material

machine. It makes a loud grinding noise when it sews. Sounds like it's coming from the wheel. It loads the bobbin soundlessly and smoothly, but when I switch to sewing it starts grinding. It will sew,

...jammed in machine. Viking 1100. So the underside looks more like a **** rug? 2 things to try. The problem is the bobbin. try flipping the bobbin over (take it out, turn it over and put it back in). ...

...sewing machine with a shuttle hook, then you can alsofollow these: 1. Disconnect the sewing machine from any power source.Loosen the thumb screw on the left side of the sewing machine body and ...

...#39; or not. I know I have a jersey sewing stitch but cannot persuade my machine to find it. Does anyone have any ideas? Thank you go here > http://www.singerco.com/contact-us to contact singer ...

...sewing machine is frozen and singer quantum le my sewing machine is frozen and the wheel can't even be turned manually Check to make sure you do not have a small piece of thread stuck in the raceway ...

broke needle and machine jammed, can't get it to unjam, it beeps and lights blink, is there a way to reset machine, love my machine 't buy a new one or fix it