Questions & Answers for: set up key

...found the answer here: http://www.sharpusa.com/files/cal_man_EL2630PIII.pdf You basically set the lever to "RATE SET", key in the date info and then press the clock/calendar key (3rd button from

...Set key 4. Use (up or down) arrows to select REPORT SETTINGS 5. Press Set key 6. Use arrows to select TX REPORT 7. Press Set key 8. Use arrows to select OUTPUT YES 9. Press Set key 10. At PRINT WITH ...

Set] key for three seconds 3. Enter the date in MMDDYYYY format 4. Press the [Time Set] key 5. Press the [C/CE] key To set time: 1. Press the [Calendar/Clock] key twice 2. Press and hold the [Time Set

...set 8-digit ECM master key code must be entered by the key operator to access the Electronic Copy Monitor functions, and a service-set 4-digit Weekly timer master key code must be entered by the key ...

...Set key. Again press the key several times to display 0 and then press the Set key 3) Press the Mono Start key several times until the purge count appears on the LCD. 4) Reset the purge count to zero ...

key. 3. Set Seconds and advance to Set minutes by pressIng the mode key. 4. adjust minutes by pressIng the s/s or r key. 5. Set minutes and advance to Set hour by pressIng the mode key. 6. adjust hour

how to reset samsung s w299 Restore factory default setting 1 Find "Reset settings" Press the Navigation key to access the main menu. Scroll to Settings and press the Navigation key. Scroll to Reset ...

...key). 5. Press 'Add' [If there are profiles in the hand set already Press 'Options' then select 'Add new'] 6. Highlight 'Web' and press 'Select' (Navi key). 7. ...

...set 8-digit ECM master key code must be entered by the key operator to access the Electronic Copy Monitor functions, and a service-set 4-digit Weekly timer master key code must be entered by the key ...

...key)Skip past Network type this should be set to IPv4Skip past Authentication type, this should be set as NormalHighlight Username and Select (press Navi key), enter giffgaff and OK (press Navi ...