Questions & Answers for: set cable wire distributor engine

...needle nose pliers and pull the cable with it it..should open the hood so u can check ur engine fluids also try pulling it and have someone tap the hood with their palm .. sometimes this also works

...alfa romeo spider veloce. can you tell me where the 2 fuel pumps are located and the best way to pull the parts from the vehicle? I have an 89 one in fuel tank and one under car near differential, ...

...Alfa Romeo Spider Veloce from 1986 and it needs a good fixing. I have taken it to a cpuple of dealers that are not Alfa Romeo and they keep breaking it. If you know a dealer I could take I would ...

...romeo spider graduate try changing the flywheel sensors. My 86 had exact the same problem, i changed the spark plugs, wires, distributor and finally the good o alfa mechanic found the issue. good ...

...Alfa V6 3l does anyone know the crank main bearing torque setting for a Alfa romeo 3L V6 engine Torque to 25Nm, then tighten through a further 79 degrees. You need an angle gauge to do it

drawings of the timing and the fire order for a alfa romea 1986 2.5L v6 3 6 2 5 1 4 Looking from front of engine this is cylinder configuration Firing order 1/4/2/5/3/6 Distributor rotates clockwise

where is the fuel pump located on a 1986 alfa romeo 2 pumps. Primary pump is underneath the car, roughly beneath the passenger seat, the secondary pump is inside the gas tank.

...engine you, hear you can find the real fuel consumption for Alfa Romeo 156 sportswagon. Also here you can find fuel consumption with highway drive, mixed drive and city drive for this ...

...alfa spider with the Mirelli distributor and SPICA sytem? my car is an 1974 ALFA ROMEO SPIDER VELOCE with the ineizone 2000 system 4cylynder DOHC SPICA mechanical fuel injection system with a Mirelli ...

Which Relay controls cooling fans in Alfa Romeo GTV6 1986 The cooling fan relay for the Alfa Romeo GTV6 1986 is located on the firewall, just behind the battery. The part number is 6043313.