...device thats makes the bar slide up and down to scan the page. Hope this helped some. Kevin i fixed mine, take off the blue lid and there are two screws at the back of the scanner, take them out and ...
...scanner is seen in device manager as a scanner then your graphics editor should have the ability to "aquire" the data from the scanner. window's "Paint" program, if you pull it up, go to "File" then ...
Question about Perfection 3200 Photo Flatbed Scanner
my epson 3200 photo scanner won't initialize. the power turns on and the scanner tries to move but only moves a little bit. the error light comes on green but beeps 3 or 4 times then goes to red. i ...
...scanner portion of the All-in-one device. Although I'm not familiar with this specific model, I would look around the back of the printer about half way up on either side for a mechanical pull lever. ...
Question about Perfection 4870 PRO Flatbed Scanner
...locking mechanism is set to lock or unlock? on the side is a lock device that can lock or unlock the scanner during shipping. check to see if thats the problem. It towards the back on side. thanks ...
Scanner locked message on display. Will not copy Scanner locked message on display. Will not copy or send fax. Will receive fax. Check if the transit lock may have engaged due to movement. These locks
...Scanner driver in the Device Manager sheet. Step 3 If you have not installed a driver yet, or the driver is incorrect, search on the website and download the supporting and latest driver for your USB ...
...device -4630". Question canon DR-2010C scanner which gives error after some times.my system is vista.the error is "The device could not be locked. Check to see that another application isn't ...
Question about imageFORMULA DR-7550C - Document scanner - Duplex - - 3623B002
...device manager. It seems to automatically reinstall when I connect the scanner and the Canon website indicates that there is no driver required (or available) for Windows 8.1. I'm at a total loss. I ...
Question about CanoScan 9000F Mark II Color Image Scanner, 18 sec for 35mm Negative at 1200 dpi Scan Speed, 9600 dpi CCD Sensor, 9600x9600 dpi Film Resolution
...device off and back on. Scanner driver will be closed. code 2, 189,0" All scanners come with the scanning head locked to prevent damage to it during shipping. On the back of the scanner, where the ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions